Printing Engineer Jobs in Lebanon
597 Jobs Found
Save and set alert for similar positionsManage alerts
We are seeking a creative and technically skilled Architect with 3–6 years of professional experience to join an architectural practice in Abidjan.
<br>
<br>Working Arrangement: Initially remote for the first couple of months, followed by relocation to Abidjan.
<br>
<br>Requirements:
<br>- Degree in Architecture.
<br>- 3–6 years of relevant experience.
<br>- Strong design and technical drawing skills.
<br>- Proficiency in AutoCAD and/or Revit and 3D modelling software.
<br>- Good knowledge of construction methods and materials.
<br>- Fluent French (written and spoken) is essential.
<br>- Strong communication and organizational skills.
<br>- Willingness to relocate to Abidjan
Job Duties:
<br>- Plan and execute preventive and corrective maintenance of electrical equipment and systems.
<br>- Troubleshoot electrical faults and minimize equipment downtime.
<br>- Monitor motors, transformers, control panels, and related systems.
<br>- Coordinate maintenance activities with production and other engineering teams.
<br>Maintain accurate records of maintenance activities, breakdowns, and spare parts.
<br>- Ensure compliance with electrical safety standards, procedures, and regulations.
<br>Support continuous improvement and energy-efficiency initiatives.
<br>
<br>
<br>Qualifications:
<br>* Bachelor’s degree in Electrical Engineering or equivalent.
<br>* 2–5 years of relevant industrial maintenance experience.
<br>* Good knowledge of electrical systems, troubleshooting, and preventive maintenance.
<br>
<br>Location: Zouk Mosbeh
Review drawings, specifications, quantities, and other technical documents.
<br>
<br>Supervise site activities and verify that work follows approved drawings and project requirements.
<br>
<br>Prepare quantity takeoffs, cost estimates, progress reports, and technical submissions.
<br>
<br>Coordinate with consultants, contractors, subcontractors, suppliers, and project teams.
<br>
<br>Monitor progress, identify delays or technical issues, and recommend practical solutions.
<br>
<br>Inspect construction work and materials, document defects, and follow up on corrective actions.
<br>
<br>Support the preparation and review of shop drawings, method statements, and as-built drawings.
<br>
<br>Monitor compliance with applicable building codes, permits, and health and safety procedures.
<br>
<br>Maintain accurate site records and support project handover
Main Responsibilities
<br>• Develop full-stack application features based on defined requirements
<br>• Build frontend components using Angular
<br>• Implement backend services and RESTful APIs
<br>• Write and optimize PostgreSQL queries and database structures
<br>• Execute assigned development tasks within defined workflows
<br>• Test and validate features before deployment
<br>• Identify, troubleshoot, and resolve system issues
<br>• Document technical work, solutions, and processes clearly
<br>• Maintain system performance, reliability, and stability
<br>
<br>Qualifications
<br>• Bachelor’s degree in Computer Science, Engineering, or related field (preferred)
<br>• Relevant experience in full-stack development (1+ years)
<br>• Proven ability to deliver production-level applications
Monitor project progress and ensure that work is completed according to the approved schedule.
<br>- Perform site inspections and ensure proper execution of structural, concrete, masonry, finishing, and other civil works.
<br>- Check quantities, measurements, and materials used on site.
<br>- Prepare daily and periodic site reports and document project progress.
<br>- Identify technical problems on-site and propose appropriate engineering solutions.
<br>- Ensure compliance with health, safety, and environmental regulations.
<br>- Monitor the quality of materials and workmanship and report any deficiencies.
<br>- Assist in preparing BOQs, cost estimates, material requirements, and project documentation.
<br>- Follow up on material deliveries and ensure materials are available according to project requirements
Job Duties:
<br>- Plan and execute preventive and corrective maintenance of electrical equipment and systems.
<br>- Troubleshoot electrical faults and minimize equipment downtime.
<br>- Monitor motors, transformers, control panels, and related systems.
<br>- Coordinate maintenance activities with production and other engineering teams.
<br>Maintain accurate records of maintenance activities, breakdowns, and spare parts.
<br>- Ensure compliance with electrical safety standards, procedures, and regulations.
<br>Support continuous improvement and energy-efficiency initiatives.
<br>
<br>
<br>Qualifications:
<br>* Bachelor’s degree in Electrical Engineering or equivalent.
<br>* 2–5 years of relevant industrial maintenance experience.
<br>* Good knowledge of electrical systems, troubleshooting, and preventive maintenance.
<br>
<br>Location: Zouk Mosbeh
•Assist in the operation, inspection, and maintenance of bakery production equipment.
<br>•Support preventive and corrective maintenance activities.
<br>•Monitor the condition and performance of mechanical equipment and identify potential problems.
<br>•Assist in troubleshooting mechanical breakdowns and equipment failures.
<br>•Follow up on maintenance work orders and ensure that issues are properly resolved.
<br>•Maintain accurate records of maintenance activities, breakdowns, spare parts, and equipment history.
<br>•Assist in developing and updating preventive maintenance schedules.
<br>•Work closely with Production Supervisors and operators to understand equipment problems and production requirements.
<br>•Respond promptly to mechanical issues affecting production.
<br>•Coordinate maintenance interventions to minimize production interruptions.
<br>•Provide feedback regarding recurring equipment problems and potential improvements
Responsibilities:
<br>
<br>Provide consultancy and technical support in concrete and construction materials.
<br>Conduct concrete mix designs, material testing, QA/QC, site inspections, and structural assessments.
<br>Evaluate concrete defects, durability, NDT results, and repair methods.
<br>Inspect ready-mix plants and construction practices.
<br>Prepare technical reports, procedures, specifications, and quotations.
<br>Conduct technical training, research, and R&D activities.
<br>Ensure compliance with international standards and codes.
<br>Support clients and promote company technical services.
<br>
<br>Requirements:
<br>
<br>Civil/Materials Engineering degree.
<br>Strong knowledge of concrete technology and construction materials.
<br>Experience in testing, consultancy, and QA/QC is preferred.
<br>Good communication and technical reporting skills.
<br>Fluent English; Arabic is an advantage
Lead and supervise civil construction activities from project commencement through completion.
<br>- Manage site engineers, supervisors, subcontractors, and construction teams.
<br>- Ensure all works are executed in accordance with approved drawings, specifications, and project requirements.
<br>- Review construction drawings, BOQs, specifications, method statements, and technical documents.
<br>- Coordinate with consultants, architects, MEP teams, subcontractors, and suppliers.
<br>- Monitor project progress and ensure work is completed according to the approved schedule.
<br>- Identify technical and construction issues and provide practical solutions.
<br>- Monitor the quality of materials and workmanship and ensure compliance with required standards.
<br>- Conduct regular site inspections and follow up on corrective actions.
<br>- Prepare and review quantity take-offs, material requirements, and work measurements.
<br>- Monitor project costs and assist in controlling variations and additional works.
<br>- Prepare daily, weekly, and monthly progress reports for management.
<br>- Participate in project meetings and provide technical updates and recommendations.
<br>- Ensure proper coordination between drawings and actual site conditions.
<br>- Follow up on procurement, delivery, and availability of construction materials.
<br>- Ensure compliance with health, safety, and environmental requirements.
<br>- Review subcontractors’ work and monitor their performance.
<br>- Support project planning, execution, and handover activities.
<br>- Mentor and guide junior engineers and site staff.
<br>- Represent the company professionally with clients, consultants, and other project stakeholders
<p>Review technical offers, drawings, and designs prepared by junior electrical engineers. Make independent technical decisions and provide guidance and feedback to junior engineers. Respond to Requests for Information (RFIs) and provide technical clarifications. Review and analyze MEP tenders to ensure compliance with project requirements and technical specifications. Design and develop electrical and low-current systems, including power distribution, lighting, fire alarms, security, and data networks. Prepare detailed shop drawings and technical documentation for electrical and low-current systems. Conduct quantity take-offs and prepare Bills of Quantities (BOQs) for estimation and tendering purposes. Prepare techno-commercial proposals for MEP tenders, including cost estimates, material specifications, and technical submittals. Coordinate with engineers, project managers, construction teams, suppliers, and vendors to ensure effective project execution and material selection. Ensure designs comply with applicable international and local electrical standards, codes, and regulations. Maintain up-to-date knowledge of electrical engineering standards, technologies, and industry practices.</p><p><strong>Desired Candidate Profile</strong></p><h2>Requirements</h2><p>Masteru0019s degree in Electrical Engineering. Minimum 5 years of experience in the MEP field. Strong experience in the design and development of electrical and low-current systems. Proficiency in AutoCAD, Revit, and other relevant engineering/design software. Experience in BOQs, quantity take-offs, cost estimation, and MEP tendering. Strong understanding of applicable international and local electrical standards and codes. Ability to review technical work, make independent decisions, and supervise junior engineers. Strong analytical, problem-solving, organizational, and communication skills. Ability to work independently and effectively within a multidisciplinary team. Strong attention to detail and a disciplined, professional approach. Good command of French and English. "Work_Experience":"6-9 years"</p>
ROLES & RESPONSIBILITIES:
<br>• Engage prospective customers, presenting our range of electric vehicles and highlighting their unique features and benefits.
<br>• Translate technical details into compelling value propositions that resonate with potential clients.
<br>• Develop and maintain strong client relationships, guiding customers through the sales process and addressing inquiries.
<br>• Achieve and exceed sales targets by leveraging your persuasive skills and product knowledge.
<br>
<br>QUALIFICATIONS:
<br>• Proven track record in sales, preferably in the automotive industry or related field.
<br>• Strong communication and negotiation abilities with a customer-centric approach.
<br>• Passion for sustainable technology and a genuine interest in electric vehicles.
<br>• Self-motivated, goal-oriented, and adaptable to a dynamic work environment.
<br>• Bachelor's or Master's degree in Electrical, Mechanical, Software, Mechatronics or Electromechanical Engineering .
<br>• English is a must
Customer Engagement: Establish and maintain relationships with clients, understanding their needs and providing technical expertise on products and services.
<br>
<br>Technical Presentations: Prepare and deliver presentations to explain product features and benefits to customers.
<br>
<br>Sales Support: Collaborate with the sales team to identify customer requirements and provide necessary support throughout the sales process.
<br>
<br>Problem Solving: Assist clients in resolving issues with product usage and recommend improvements or upgrades.
<br>
<br>Market Analysis: Analyze customer feedback and market trends to propose new product ideas and enhancements.
<br>
<br>Training: Provide training and technical information to customers and sales staff to ensure a thorough understanding of products.
<br>
<br>Qualifications
<br>Education: A bachelor's degree in Mechanical or Electrical engineering,
<br>
<br>Experience: Previous experience in sales engineering, technical support, or a related field is preferred.
<br>
<br>Skills: Strong technical knowledge, excellent communication skills, and the ability to explain complex concepts to non-technical audiences are essential
Civil & Architectural Scope
<br>Job Purpose
<br>To support the Procurement Department in fit-out projects by reviewing drawings, BOQs, and specifications, preparing quantity take-offs, checking project requirements, obtaining quotations, and ensuring materials and subcontract works are procured correctly, technically, and within budget.
<br>Main Responsibilities
<br>• Review architectural, civil, and fit-out drawings, BOQs, and specifications.
<br>• Prepare quantity take-offs for fit-out materials and works.
<br>• Highlight additional, omitted, remeasured, or variation items before procurement.
<br>• Prepare RFQs and send inquiries to suppliers and subcontractors.
<br>• Obtain and compare quotations technically and commercially.
<br>• Check material specifications, brands, sizes, quantities, and compliance with project requirements.
<br>• Coordinate with Project Managers, Site Engineers, QS, and Tendering teams.
<br>• Assist in supplier negotiation and cost-saving activities.
<br>• Ensure procurement requests are supported by proper drawings, quantities, and approvals before ordering.
<br>Required Qualifications
<br>• 2–4 years of relevant experience in fit-out, interior contracting, or construction procurement.
<br>• Good knowledge of fit-out materials including tiles, gypsum, ceilings, flooring, joinery, metal works, paint, glass, and finishing materials.
<br>• Strong ability to read drawings and prepare quantity take-offs.
<br>• Good knowledge of AutoCAD and Microsoft Excel.
<br>• Good communication and negotiation skills
Job Purpose:
<br>
<br>- Estimate, design and draw precast / post tension floors and building solutions in direct coordination with the client.
<br>
<br>
<br>Job Duties:
<br>
<br>- Perform structural analysis and design for mostly but not limited to horizontal elements, including precast/ prestressed/ post tension/ RC slabs and beams.
<br>
<br>- Carry out cost comparisons and value engineering to choose the most effective type of structural system to price or execute.
<br>
<br>- Deliver design solutions and drawings to high quality standards in a timely manner to meet project schedules.
<br>
<br>- Coordinate site activities with factory and client
<br>
<br>
<br>Skills
<br>
<br>- 2 years experience minimum in reinforced concrete design
<br>
<br>- Software knowledge: Etabs or robot, safe, AutoCAD 2d.
<br>- Ability to calculate all structural elements by hand.
<br>
<br>- Knowledge of the following codes: ACI 318, IBC / UBC
<br>
<br>
<br>Requirements
<br>The following are not required but are a plus if they are already acquired before training:
<br>- Knowledge of the PCI 7th edition, PTI 6th edition or other prestressed codes.
<br>- Adapt, RAM or other prestressed software knowledge
<p>Review contract documents, specifications, drawings, and project requirements. Review and optimize mechanical designs, engineering calculations, and system layouts for HVAC, Plumbing, and Fire Fighting systems. Prepare detailed and coordinated shop drawings and BIM models using AutoCAD and Revit. Perform equipment selection and engineering calculations, including HVAC load calculations, ventilation calculations, hydraulic calculations, and pipe and duct sizing. Coordinate mechanical systems with architectural, structural, electrical, plumbing, and other building disciplines to resolve clashes and ensure constructability. Prepare material schedules, equipment schedules, and technical submittals. Ensure compliance with project specifications, applicable codes, and client requirements. Review consultant comments and revise drawings accordingly. Attend coordination meetings and provide technical support during project execution. Support procurement and site teams by resolving technical queries and issuing drawing revisions when required. Support quantity take-offs from BIM models and shop drawings when required.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Strong knowledge of HVAC, Plumbing, and Fire Fighting systems.</li><li>Knowledge of HVAC load calculations, hydraulic calculations, ventilation, and equipment selection.</li><li>Familiarity with international standards and codes, including ASHRAE, NFPA, SMACNA, IPC/UPC, and NF.</li><li>Proficiency in AutoCAD and Revit MEP.</li><li>Knowledge of Navisworks is preferred.</li><li>Experience with HVAC design software such as HAP or equivalent.</li><li>Proficiency in Microsoft Office Suite.</li><li>Attention to detail and accuracy.</li><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and interpersonal skills.</li><li>Teamwork and collaboration.</li><li>Time management and ability to work under pressure.</li><li>Adaptability and willingness to learn.</li><li>Professionalism, integrity, and accountability.</li><li>Self-motivation and reliability.</li><li>Bacheloru2019s degree in Mechanical Engineering.</li><li>Minimum 3u20135 years of experience in mechanical design and shop drawing preparation.</li><li>Experience in HVAC, Plumbing, and Fire Fighting system design.</li><li>Proficiency in AutoCAD, Revit MEP, and Microsoft Office.</li><li>Knowledge of HAP is an advantage.</li><li>Good command of both English and French is required.</li></ul>
We are looking for a talented and experienced Senior Interior Architect to join our team.
<br>
<br>Requirements:
<br>• Master’s Degree in Interior Architecture
<br>• Minimum 5 years of professional experience
<br>• Strong design sense with excellent attention to detail
<br>• Solid experience in concept development, space planning and material selection
<br>• Strong knowledge of technical and execution drawings
<br>• Strong understanding of civil works, construction methods and site execution
<br>• Experience in joinery, custom furniture and interior detailing
<br>• Proven experience in site management, supervision and coordination
<br>• Ability to monitor site progress, quality, workmanship and compliance with drawings
<br>• Ability to coordinate with suppliers, contractors, subcontractors and site teams
<br>• Ability to review quantities, materials, shop drawings and construction details
<br>• Strong knowledge of finishing works, including flooring, ceilings, partitions, plastering, painting and waterproofing
<br>• Ability to identify and resolve technical and construction issues on site
<br>• Proficiency in AutoCAD and relevant 3D/design software
<br>• Ability to manage projects from concept through execution
<br>• Strong communication, organization and follow-up skills
<br>• Ability to manage timelines, coordinate multiple trades and ensure timely project delivery
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>We are seeking a motivated Junior Architect or Fresh Graduate to join our growing Sydney-based design team in a work-from-home position.</p><p>The successful candidate will have the opportunity to develop their skills across a diverse range of commercial, retail, public and educational projects, including shop fit-outs and other commercial developments. The role will provide exposure to multiple stages of the design and documentation process, with support and guidance from experienced members of the team.</p><p>We are looking for someone who is creative, design-focused and technically capable, with a genuine interest in architecture and producing high-quality work. Strong written and verbal English communication skills are essential, particularly given the remote nature of the position.</p><p>The ideal candidate will demonstrate:</p><ul><li>A strong architectural and design sensibility</li><li>Good technical and documentation skills</li><li>Proficiency in architectural drafting and design software</li><li>Strong attention to detail</li><li>Good written and spoken English</li><li>The ability to work independently and communicate effectively in a remote environment</li><li>Enthusiasm, initiative and a willingness to learn</li><li>Good time management and the ability to meet project deadlines</li></ul><p><br></p><p>This is an excellent opportunity for a fresh graduate who wants to gain practical, hands-on project experience, develop their technical and design capabilities, and grow with an expanding practice.</p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p>Revit & AutoCAD </p></div>
Job Description: Project Architect – Liberia
<br>
<br>Contract: Three months, fixed-term
<br>Location: Liberia; candidates currently based in Liberia are preferred
<br>Reports to: Project Manager / Head of Design
<br>Project: [Insert project name and location]
<br>Start date: [Insert date]
<br>
<br>Role overview
<br>
<br>[1] is seeking an experienced and practical Project Architect to support a three-month construction and design assignment in Liberia. The role will focus on design development, construction documentation, shop drawings, as-built drawings, site coordination, and project close-out.
<br>The preferred candidate will already be in Liberia and available to start at short notice. Candidates outside Liberia may be considered if they can mobilize immediately and remain available for the full contract.
<br>
<br>Key responsibilities
<br>
<br>•
<br>Develop and update architectural plans, elevations, sections, details, schedules, and construction drawings.
<br>
<br>•
<br>Review the project brief, existing drawings, specifications, site conditions, and design changes.
<br>
<br>•
<br>Prepare, coordinate, and review architectural shop drawings for doors, windows, ceilings, partitions, joinery, finishes, stairs, façades, and related works.
<br>
<br>•
<br>Coordinate architectural drawings with structural, civil, mechanical, electrical, plumbing, and specialist works.
<br>
<br>•
<br>Verify site conditions and measurements, record construction changes, and prepare accurate progressive and final as-built drawings.
<br>
<br>•
<br>Attend site inspections and coordination meetings and respond to technical queries.
<br>
<br>•
<br>Check architectural works against approved drawings, specifications, materials, and workmanship requirements.
<br>
<br>•
<br>Maintain drawing registers, revision logs, technical queries, site notes, and the final handover package.
<br>
<br>•
<br>Support the Project Manager, client, consultant, contractor, subcontractors, and suppliers in resolving design and construction issues.
<br>
<br>Qualifications and experience
<br>
<br>•
<br>Bachelor’s degree in Architecture or an equivalent recognized qualification.
<br>
<br>•
<br>Minimum five years of relevant architectural experience, preferably on building, commercial, institutional, residential, hospitality, or mixed-use projects.
<br>
<br>•
<br>Demonstrated experience with design development, construction drawings, shop drawings, as-built documentation, and active construction sites.
<br>
<br>•
<br>Strong AutoCAD skills. Revit, BIM coordination, SketchUp, or similar software is an advantage.
<br>
<br>•
<br>Good understanding of construction materials, finishes, detailing, site measurement, and document control.
<br>
<br>•
<br>Ability to work independently, coordinate multiple disciplines, communicate clearly, and deliver accurate work under tight deadlines.
<br>
<br>•
<br>Professional registration or eligibility for registration is preferred, subject to applicable Liberian and project requirements.
<br>
<br>Contract and application
<br>
<br>The successful candidate will work primarily from the project site or designated project office in Liberia, with travel within Liberia if required. Remuneration will be agreed based on experience. Applicants should state their expected monthly rate or total fee, availability, current location, and ability to work in Liberia.
<br>
<br>Please submit a CV, short cover letter, portfolio or relevant work samples, qualifications, and two professional references to [insert email address] by [insert closing date]. Use the subject line: Application – Project Architect, Liberia.
<br>
<br>Short advertisement
<br>
<br>Project Architect – Liberia | Three-Month Contract
Job Description: Project Architect – Liberia
<br>
<br>Contract: Three months, fixed-term
<br>Location: Liberia; candidates currently based in Liberia are preferred
<br>Reports to: Project Manager / Head of Design
<br>Project: [Insert project name and location]
<br>Start date: [Insert date]
<br>
<br>Role overview
<br>
<br>[1] is seeking an experienced and practical Project Architect to support a three-month construction and design assignment in Liberia. The role will focus on design development, construction documentation, shop drawings, as-built drawings, site coordination, and project close-out.
<br>The preferred candidate will already be in Liberia and available to start at short notice. Candidates outside Liberia may be considered if they can mobilize immediately and remain available for the full contract.
<br>
<br>Key responsibilities
<br>
<br>•
<br>Develop and update architectural plans, elevations, sections, details, schedules, and construction drawings.
<br>
<br>•
<br>Review the project brief, existing drawings, specifications, site conditions, and design changes.
<br>
<br>•
<br>Prepare, coordinate, and review architectural shop drawings for doors, windows, ceilings, partitions, joinery, finishes, stairs, façades, and related works.
<br>
<br>•
<br>Coordinate architectural drawings with structural, civil, mechanical, electrical, plumbing, and specialist works.
<br>
<br>•
<br>Verify site conditions and measurements, record construction changes, and prepare accurate progressive and final as-built drawings.
<br>
<br>•
<br>Attend site inspections and coordination meetings and respond to technical queries.
<br>
<br>•
<br>Check architectural works against approved drawings, specifications, materials, and workmanship requirements.
<br>
<br>•
<br>Maintain drawing registers, revision logs, technical queries, site notes, and the final handover package.
<br>
<br>•
<br>Support the Project Manager, client, consultant, contractor, subcontractors, and suppliers in resolving design and construction issues.
<br>
<br>Qualifications and experience
<br>
<br>•
<br>Bachelor’s degree in Architecture or an equivalent recognized qualification.
<br>
<br>•
<br>Minimum five years of relevant architectural experience, preferably on building, commercial, institutional, residential, hospitality, or mixed-use projects.
<br>
<br>•
<br>Demonstrated experience with design development, construction drawings, shop drawings, as-built documentation, and active construction sites.
<br>
<br>•
<br>Strong AutoCAD skills. Revit, BIM coordination, SketchUp, or similar software is an advantage.
<br>
<br>•
<br>Good understanding of construction materials, finishes, detailing, site measurement, and document control.
<br>
<br>•
<br>Ability to work independently, coordinate multiple disciplines, communicate clearly, and deliver accurate work under tight deadlines.
<br>
<br>•
<br>Professional registration or eligibility for registration is preferred, subject to applicable Liberian and project requirements.
<br>
<br>Contract and application
<br>
<br>The successful candidate will work primarily from the project site or designated project office in Liberia, with travel within Liberia if required. Remuneration will be agreed based on experience. Applicants should state their expected monthly rate or total fee, availability, current location, and ability to work in Liberia.
<br>
<br>Please submit a CV, short cover letter, portfolio or relevant work samples, qualifications, and two professional references to [insert email address] by [insert closing date]. Use the subject line: Application – Project Architect, Liberia.
<br>
<br>Short advertisement
<br>
<br>Project Architect – Liberia | Three-Month Contract
Join our Beirut team and be part of something significant.
<br>
<br>We are looking for a skilled and motivated Architect with 5+ years of professional experience and strong expertise in Revit and Rhino to join our office in Beirut, Lebanon.
<br>
<br>This is an exciting opportunity to work on a major, large-scale landmark project, collaborating with a multidisciplinary team and contributing to a challenging and rewarding architectural environment.
<br>
<br>What we’re looking for:
<br>Bachelor’s or Master’s degree in Architecture
<br>5+ years of relevant professional experience
<br>Advanced proficiency in Revit & Rhino
<br>Strong architectural design and technical skills
<br>Excellent attention to detail and problem-solving abilities
<br>Ability to work effectively within a multidisciplinary team
<br>Experience with large-scale projects is a strong advantage
<br>
<br>???? Location: Beirut, Lebanon
<br>???? To apply: Send your CV to info@bim-me.com
<br>
<br>If you are an ambitious architect ready to take on new challenges and contribute to a landmark project, we would love to hear from you.
<br>
<br>Join us. Design with us. Build what’s next
Receive email alerts for Printing Engineer Jobs in Lebanon jobs
You can cancel your email alert at anytime