وظائف فنى بصريات في لبنان

Solar Energy Technician <br> <br>Job Type: Full-Time <br>Department: Technical / Solar Energy <br>Location: Saida <br> <br>Job Responsibilities <br> <br>* Install, dismantle, maintain, and troubleshoot solar energy systems. <br>* Install and connect solar inverters, LiFePO₄ batteries, solar panels, protection devices, and electrical equipment. <br>* Perform electrical wiring, connections, testing, and commissioning. <br>* Diagnose and troubleshoot system faults and technical issues. <br>* Assist in the installation and maintenance of On-Grid, Off-Grid, and Hybrid Solar Systems. <br>* Follow electrical safety standards and proper installation procedures. <br>* Perform site visits and assist with technical assessments when required. <br>* Work with the technical team to ensure systems are installed and operating correctly. <br>* Handle tools and equipment safely and professionally. <br> <br>Requirements <br> <br>* Previous experience in Solar Energy / Electrical Installation. <br>* Practical experience installing and dismantling solar systems. <br>* Good knowledge of Inverters, Batteries, Solar Panels, AC/DC wiring, and electrical protection systems. <br>* Ability to read basic electrical diagrams and understand system connections. <br>* Ability to troubleshoot electrical and solar-system problems. <br>* Good teamwork and communication skills. <br>* Ability to work on-site and travel to customer locations when required. <br>* Driving license is a plus. <br> <br>Preferred Experience <br> <br>Experience with brands such as Deye, Growatt, GoodWe, Victron, Voltronic, Must, or similar inverter systems is an advantage. <br> <br>We are looking for a practical, reliable, and experienced Solar Technician who can independently handle installation, dismantling, testing, and troubleshooting of solar energy systems. <br> <br>Send your CV to info@sunline-tech.com

A pest control technician inspects properties for pest activity, identifies the type and extent of infestation, and applies the right treatment to eliminate or control it <br>Main tasks <br>• Inspect homes, buildings, and surrounding areas for signs of pests, entry points, and damage. <br>• Decide what treatment is needed, such as traps, baits, sprays, fumigation, or exclusion methods. <br>• Apply pesticides or other control methods safely and according to instructions and regulations. <br>• Set and monitor traps, bait stations, and other pest-control devices. <br>• Advise customers on prevention, sanitation, sealing cracks, and other ways to reduce future infestations. <br>• Keep service records, complete paperwork, and report what was treated and what products were used. <br>• Maintain equipment, service vehicles, and safety procedures during daily work. <br>Common work settings <br>Pest control technicians may work in homes, commercial buildings, industrial sites, or outdoor areas, depending on the client and pest problem. They may also respond to urgent calls when infestations need immediate treatment

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div><span ><b>‼️ PRIMETALENT IS HIRING ‼️</b></span></div><div><span >We are hiring a Technician for our reputable Company in New Jdeideh, Lebanon</span></div><div><span ><br></span></div><div><span ><b>Key Responsibilities:</b></span></div><div><span >* Install GPS tracking devices &amp; CCTV surveillance systems</span></div><div><span >* Perform equipment testing, troubleshooting &amp; maintenance</span></div><div><span >* Handle cabling, wiring &amp; system installations</span></div><div><span >* Conduct site inspections &amp; technical assessments</span></div><div><span >* Provide technical support &amp; preventive maintenance</span></div><div><span ><br></span></div><div><span ><b>Key Qualifications:</b></span></div><div><span >* Technical Degree in Electrical, Electronics, IT or related field</span></div><div><span >* 2+ years of experience in GPS, CCTV or similar systems</span></div><div><span >* Knowledge of Networking, Cabling &amp; Troubleshooting</span></div><div><span >* Age between 25 – 45</span></div><div><span >* Driving License is a MUST</span></div><div><span ><br></span></div><div><span ><b>We are Offering:</b></span></div><div><span >* Working days: Monday to Friday from 9:00 AM - 6:00 PM</span></div><div><span >* Package Around $800 – 900</span></div><div><br></div><div><br></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Technical Degree in Electrical, Electronics, IT or related field</li><li>2+ years of experience in GPS, CCTV or similar systems</li><li>Knowledge of Networking, Cabling &amp; Troubleshooting</li><li>Age between 25 45</li><li>Driving License is a MUST</li></ul><p></p></section>

The HVAC Technician is responsible for installing, inspecting, maintaining, troubleshooting, and repairing heating, ventilation, air conditioning, and refrigeration systems. The role ensures that all HVAC equipment operates efficiently, safely, and in accordance with company and manufacturer standards. <br> <br>Key Responsibilities: <br> <br>1-Install and commission air conditioning, ventilation, and refrigeration systems. <br>2-Perform preventive and corrective maintenance on HVAC equipment. <br>3-Diagnose and troubleshoot mechanical and electrical faults. <br>4-Inspect HVAC systems to ensure efficient and safe operation. <br>5-Service equipment such as split units, central air-conditioning systems, chillers, AHUs, FCUs, ventilation systems, and refrigeration units, depending on the facility. <br>6-Maintain records of inspections, repairs, maintenance activities, and spare parts used. <br> <br>Qualifications: <br> <br>1-Technical diploma or certification in HVAC, Refrigeration, Mechanical Engineering, or a related field. <br>2-Minimum 5–7 years of practical experience in HVAC installation and maintenance. <br>3-Ability to read technical drawings, wiring diagrams, and equipment manuals. <br>4-Detail oriented

A Senior Mechanical Technician in power generation is responsible for leading maintenance and repair activities on mechanical equipment within a power plant, ensuring optimal performance and reliability. This role involves hands-on work, troubleshooting, leading teams, and contributing to preventative maintenance programs. <br> <br>• Conduct competent and effective preventative and corrective maintenance on all generators <br>• To be highly knowledgeable of and competent in the spares parts required and supporting mechanical systems at the power plants. . <br>• Maintain records and reports as required, including inventory of necessary parts. <br>• Demonstrate leadership and commitment in ensuring that maintenance activities are performed by self and team members in full compliance with the company’s Environmental, Health and Safety policies and procedures when on the plant site and during the execution of work duties. <br>• Be available to respond to emergencies at all times outside of regular working hours. <br> <br>Qualifications: <br>- BT, TS, LT Degree in Mechanical <br>- Minimum 5 years’ experience in engines repairs

???? Location: Jadra, Lebanon | ???? Full-Time <br> <br>We are looking for a hands-on IT Technician with strong experience in hardware troubleshooting and technical support. Exposure to software development is an advantage, while SAP experience will be considered a strong plus. <br> <br>Key Responsibilities <br>•Install, maintain, and troubleshoot computers, printers, and IT equipment. <br>•Diagnose and resolve hardware, software, and connectivity issues. <br>•Provide technical support to employees and ensure timely issue resolution. <br>•Perform preventive maintenance, upgrades, and equipment installations. <br>•Support basic IT infrastructure and networking activities. <br>•Assist with software development, system enhancements, and business applications. <br>•Support SAP and coordinate with external IT service providers when required. <br>•Maintain IT asset and equipment records. <br> <br>Qualifications <br>•Bachelor’s degree or technical diploma in IT, Computer Science, or a related field. <br>•3–5 years of relevant experience, preferably with strong hardware expertise. <br>•Good knowledge of hardware, operating systems, peripherals, and basic networking. <br>•Knowledge of software development/programming is an advantage. <br>•SAP experience is a strong plus. <br>•Strong troubleshooting and problem-solving skills. <br>•Good communication and teamwork skills. <br> <br>Note: Priority will be given to applicants residing in Iqlim Al Kharroub, Saida, and surrounding areas

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><b>Requirements</b>:<br><br> <br>- Bachelor s degree or diploma in Radiologic Technology / Medical Imaging or related field.<br><br>- Proven experience as a Radiology Technician with strong expertise in MRI procedures.<br><br>- Minimum 3 years of hands-on experience in MRI imaging.<br><br>- Excellent knowledge of MRI protocols, patient positioning, and safety procedures.<br><br>- Ability to operate MRI equipment efficiently and ensure high-quality diagnostic images.<br><br>- Good communication skills and ability to provide professional patient care.<br><br>- Commitment to infection control standards and radiation/MRI safety guidelines.<br><br>o Interested candidates are invited to send their CV to Careers@naqaamc.com.</div></section>

Laboratory Technician <br>Saint George Medical Center <br>Ajaltoun – Lebanon <br> <br>Saint George Medical Center is committed to providing high-quality healthcare to the community in an environment of compassion, equity, and continuous development. It aims to be a leading, academically-driven healthcare facility delivering comprehensive, individual-centered care. <br> <br>SGMC is currently recruiting a skilled Night Shift Laboratory Technician to perform routine and urgent laboratory tests, manage sample handling, operate and maintain lab equipment, and support Blood Bank operations. The ideal candidate ensures accurate results, adheres to safety standards, and helps maintain smooth laboratory operations during night hours. <br> <br>Key Responsibilities: <br>• Perform routine and STAT laboratory tests with accurate sample handling. <br>• Verify results and promptly report critical values. <br>• Operate and maintain laboratory equipment, including running calibrations and daily quality controls. <br>• Perform phlebotomy for emergency and inpatient requests as needed. <br>• Monitor reagent levels, temperatures, logs, and expiry dates. <br>• Adhere to safety standards and maintain a clean work environment. <br>• Prepare the laboratory for morning handover and complete any pending records or tests. <br>• Perform Blood Bank responsibilities during the night shift, including processing samples, issuing blood products, and completing required testing <br> <br>Job Requirements: <br>Education & Experience: <br>• BS degree in Medical Laboratory Technology or Clinical Laboratory Science <br>• Minimum 1–2 years of laboratory experience. <br>• Familiarity with Blood Bank operations is a plus <br>• Having the work license from MOPH. <br>Skills: <br>• Good observation skills and attention to details <br>• Use scientific Methods to save problems <br>• Good communication skills for reporting results and collaborating with staff <br>• Time management and ability to work independently during night shifts <br>• Knowledge of safety standards, infection control, and proper documentation <br>• Possess good command of Arabic, English and/or French <br> <br>Interested candidates may submit their resume at: hr@sgmc.com.lb

JOB TITLE: <br>Electromechanical Technician Supervisor <br>Job Summary: <br>The Electromechanical Technician Supervisor is responsible for overseeing the daily operations of the electromechanical maintenance and repair team, ensuring that electromechanical systems and equipment are installed, maintained, and repaired according to safety and performance standards. This role involves supervising a team of electromechanical technicians, coordinating work schedules, providing technical support, and ensuring compliance with safety, quality, and regulatory requirements. The Supervisor will also be involved in troubleshooting, managing preventive maintenance programs, and optimizing the performance of electromechanical systems. <br>Key Responsibilities: <br>1. Team Supervision and Leadership: <br>o Supervise and coordinate the activities of a team of electromechanical technicians, ensuring that work is completed efficiently and according to established standards. <br>o Assign tasks to team members based on skill sets, project requirements, and deadlines, ensuring a balanced workload. <br>o Provide on-the-job training, guidance, and mentorship to junior and mid-level technicians to improve their technical skills and performance. <br>o Conduct team meetings to review daily or weekly goals, safety protocols, and any challenges or issues that need to be addressed. <br>o Foster a collaborative, productive, and safety-conscious team environment, ensuring high levels of performance and morale. <br>2. Maintenance and Troubleshooting: <br>o Oversee the preventive maintenance, troubleshooting, and repair of electromechanical systems, including motors, actuators, electrical circuits, controllers, and sensors. <br>o Ensure that repairs are completed efficiently, minimizing system downtime and optimizing the lifespan of electromechanical equipment. <br>o Assist in diagnosing and resolving complex electromechanical issues, using advanced diagnostic tools (e.g., oscilloscopes, multimeters, and PLC software). <br>o Ensure that the team follows best practices and proper techniques in troubleshooting and repairs, improving overall system reliability and performance. <br>3. Preventive Maintenance Program: <br>o Manage and ensure the execution of a preventive maintenance program to reduce unplanned downtime and extend the life of electromechanical equipment. <br>o Schedule regular inspections, cleaning, calibration, and other maintenance tasks based on equipment usage and manufacturer recommendations. <br>o Monitor system performance and identify potential issues before they lead to system failures, ensuring timely intervention. <br>o Maintain a log of completed maintenance tasks and track any recurring issues to identify areas for improvement. <br>4. Safety and Compliance: <br>o Ensure compliance with safety standards and protocols in all aspects of electromechanical work, including the safe handling of electrical systems and mechanical components. <br>o Conduct safety audits, ensure the correct use of personal protective equipment (PPE), and oversee adherence to lock-out/tag-out procedures during maintenance tasks. <br>o Review and enforce safety procedures for working with electromechanical equipment, ensuring that all technicians follow proper safety protocols. <br>o Ensure that all work complies with industry standards, company policies, and regulatory requirements (e.g., OSHA, IEC, NEC). <br>5. Work Coordination and Scheduling: <br>o Coordinate daily work schedules, ensuring that all tasks are completed on time and according to priority. <br>o Assign tasks based on skill levels, team availability, and project requirements, ensuring that resources are allocated effectively. <br>o Review and monitor the progress of ongoing work, making adjustments to schedules and priorities as necessary. <br>o Ensure that work orders, repair logs, and maintenance schedules are accurately tracked and up-to-date. <br>6. Documentation and Reporting: <br>o Ensure that all maintenance and repair activities are properly documented, including work orders, inspection reports, and test results. <br>o Prepare and maintain accurate records of equipment performance, maintenance activities, repairs, and parts usage. <br>o Generate reports on system performance, maintenance activities, and any technical issues encountered, providing updates to senior management or engineering teams. <br>o Track and manage spare parts inventory to ensure that the team has the necessary materials to complete repairs and maintenance tasks. <br>7. Process Improvement and Efficiency: <br>o Identify opportunities for improving maintenance processes, enhancing system performance, and reducing equipment failure rates. <br>o Work with the engineering and management teams to implement process improvements, update procedures, and optimize the use of resources. <br>o Promote the adoption of new tools, technologies, and best practices that can improve team efficiency and the quality of work. <br>8. Collaboration with Other Departments: <br>o Collaborate with other departments such as engineering, production

Hiring a Hands-on Maintenance Technician for a leading printing production company based in Sin El Fil, Lebanon. <br> <br> <br> <br>The ideal candidate should meet the following requirements: <br> <br> <br> <br>- Technical Diploma or Associate Degree in Mechanical Engineering, Electrical Engineering, Industrial Maintenance, or another closely related technical discipline. <br> <br>- 3–5 years of proven hands-on maintenance experience within a manufacturing, industrial, or production environment. <br> <br>- Solid practical experience in electrical maintenance, including diagnosing and repairing electrical systems, motors, control panels, wiring, sensors, switches, and other industrial electrical components. <br> <br>- Strong knowledge of mechanical maintenance, including preventive, corrective, and breakdown maintenance of industrial machinery. <br> <br>- Ability to troubleshoot and repair electrical, mechanical, pneumatic, and hydraulic systems with minimal supervision. <br> <br>- Experience performing preventive maintenance programs, inspections, equipment calibration, and machine servicing to maximize operational efficiency and minimize production downtime. <br> <br>- Familiarity with industrial safety procedures. <br> <br>- Strong analytical and problem-solving skills with the ability to identify root causes of equipment failures and implement effective corrective actions. <br> <br>- Capable of working efficiently under pressure and responding promptly to emergency equipment breakdowns in a production environment. <br> <br>- Good communication and teamwork skills with the ability to collaborate effectively with production and operations teams. <br> <br>- Self-motivated, dependable, and proactive, with a strong sense of ownership, accountability, and attention to detail

Hiring a Hands-on Maintenance Technician for a leading printing production company based in Sin El Fil, Lebanon. <br> <br>The ideal candidate should meet the following requirements: <br> <br>• Technical Diploma or Associate Degree in Mechanical Engineering, Electrical Engineering, Industrial Maintenance, or another closely related technical discipline. <br>• 3–5 years of proven hands-on maintenance experience within a manufacturing, industrial, or production environment. <br>• Solid practical experience in electrical maintenance, including diagnosing and repairing electrical systems, motors, control panels, wiring, sensors, switches, and other industrial electrical components. <br>• Strong knowledge of mechanical maintenance, including preventive, corrective, and breakdown maintenance of industrial machinery. <br>• Ability to troubleshoot and repair electrical, mechanical, pneumatic, and hydraulic systems with minimal supervision. <br>• Experience performing preventive maintenance programs, inspections, equipment calibration, and machine servicing to maximize operational efficiency and minimize production downtime. <br>• Familiarity with industrial safety procedures. <br>• Strong analytical and problem-solving skills with the ability to identify root causes of equipment failures and implement effective corrective actions. <br>• Capable of working efficiently under pressure and responding promptly to emergency equipment breakdowns in a production environment. <br>• Good communication and teamwork skills with the ability to collaborate effectively with production and operations teams. <br>• Self-motivated, dependable, and proactive, with a strong sense of ownership, accountability, and attention to detail

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Saint George Medical Center is committed to providing high-quality healthcare to the community in an environment of compassion, equity, and continuous development. It aims to be a leading, academically-driven healthcare facility delivering comprehensive, individual-centered care.</p><p>SGMC is currently recruiting a skilled Night Shift Laboratory Technician to perform routine and urgent laboratory tests, manage sample handling, operate and maintain lab equipment, and support Blood Bank operations. The ideal candidate ensures accurate results, adheres to safety standards, and helps maintain smooth laboratory operations during night hours.</p><p>Key Responsibilities:</p><ul><li>Perform routine and STAT laboratory tests with accurate sample handling.</li><li>Verify results and promptly report critical values.</li><li>Operate and maintain laboratory equipment, including running calibrations and daily quality controls.</li><li>Perform phlebotomy for emergency and inpatient requests as needed.</li><li>Monitor reagent levels, temperatures, logs, and expiry dates.</li><li>Adhere to safety standards and maintain a clean work environment.</li><li>Prepare the laboratory for morning handover and complete any pending records or tests.</li><li>Perform Blood Bank responsibilities during the night shift, including processing samples, issuing blood products, and completing required testing</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>BS degree in Medical Laboratory Technology or Clinical Laboratory Science</li><li>Minimum 1 2 years of laboratory experience.</li><li>Familiarity with Blood Bank operations is a plus</li><li>Having the work license from MOPH.</li><li>Good observation skills and attention to details </li><li>Use scientific Methods to save problems</li><li>Good communication skills for reporting results and collaborating with staff</li><li>Time management and ability to work independently during night shifts</li><li>Knowledge of safety standards, infection control, and proper documentation</li><li>Possess good command of Arabic, English and/or French</li></ul><p></p></section>

JOB TITLE: <br>Electromechanical Technician Supervisor <br>Job Summary: <br>The Electromechanical Technician Supervisor is responsible for overseeing the daily operations of the electromechanical maintenance and repair team, ensuring that electromechanical systems and equipment are installed, maintained, and repaired according to safety and performance standards. This role involves supervising a team of electromechanical technicians, coordinating work schedules, providing technical support, and ensuring compliance with safety, quality, and regulatory requirements. The Supervisor will also be involved in troubleshooting, managing preventive maintenance programs, and optimizing the performance of electromechanical systems. <br>Key Responsibilities: <br>1. Team Supervision and Leadership: <br>o Supervise and coordinate the activities of a team of electromechanical technicians, ensuring that work is completed efficiently and according to established standards. <br>o Assign tasks to team members based on skill sets, project requirements, and deadlines, ensuring a balanced workload. <br>o Provide on-the-job training, guidance, and mentorship to junior and mid-level technicians to improve their technical skills and performance. <br>o Conduct team meetings to review daily or weekly goals, safety protocols, and any challenges or issues that need to be addressed. <br>o Foster a collaborative, productive, and safety-conscious team environment, ensuring high levels of performance and morale. <br>2. Maintenance and Troubleshooting: <br>o Oversee the preventive maintenance, troubleshooting, and repair of electromechanical systems, including motors, actuators, electrical circuits, controllers, and sensors. <br>o Ensure that repairs are completed efficiently, minimizing system downtime and optimizing the lifespan of electromechanical equipment. <br>o Assist in diagnosing and resolving complex electromechanical issues, using advanced diagnostic tools (e.g., oscilloscopes, multimeters, and PLC software). <br>o Ensure that the team follows best practices and proper techniques in troubleshooting and repairs, improving overall system reliability and performance. <br>3. Preventive Maintenance Program: <br>o Manage and ensure the execution of a preventive maintenance program to reduce unplanned downtime and extend the life of electromechanical equipment. <br>o Schedule regular inspections, cleaning, calibration, and other maintenance tasks based on equipment usage and manufacturer recommendations. <br>o Monitor system performance and identify potential issues before they lead to system failures, ensuring timely intervention. <br>o Maintain a log of completed maintenance tasks and track any recurring issues to identify areas for improvement. <br>4. Safety and Compliance: <br>o Ensure compliance with safety standards and protocols in all aspects of electromechanical work, including the safe handling of electrical systems and mechanical components. <br>o Conduct safety audits, ensure the correct use of personal protective equipment (PPE), and oversee adherence to lock-out/tag-out procedures during maintenance tasks. <br>o Review and enforce safety procedures for working with electromechanical equipment, ensuring that all technicians follow proper safety protocols. <br>o Ensure that all work complies with industry standards, company policies, and regulatory requirements (e.g., OSHA, IEC, NEC). <br>5. Work Coordination and Scheduling: <br>o Coordinate daily work schedules, ensuring that all tasks are completed on time and according to priority. <br>o Assign tasks based on skill levels, team availability, and project requirements, ensuring that resources are allocated effectively. <br>o Review and monitor the progress of ongoing work, making adjustments to schedules and priorities as necessary. <br>o Ensure that work orders, repair logs, and maintenance schedules are accurately tracked and up-to-date. <br>6. Documentation and Reporting: <br>o Ensure that all maintenance and repair activities are properly documented, including work orders, inspection reports, and test results. <br>o Prepare and maintain accurate records of equipment performance, maintenance activities, repairs, and parts usage. <br>o Generate reports on system performance, maintenance activities, and any technical issues encountered, providing updates to senior management or engineering teams. <br>o Track and manage spare parts inventory to ensure that the team has the necessary materials to complete repairs and maintenance tasks. <br>7. Process Improvement and Efficiency: <br>o Identify opportunities for improving maintenance processes, enhancing system performance, and reducing equipment failure rates. <br>o Work with the engineering and management teams to implement process improvements, update procedures, and optimize the use of resources. <br>o Promote the adoption of new tools, technologies, and best practices that can improve team efficiency and the quality of work. <br>8. Collaboration with Other Departments: <br>o Collaborate with other departments such as engineering, production

Job Summary: <br>The Technician team member ensures the gym facilities, equipment, and utilities are fully functional, safe, and well-maintained. This role involves carrying out repairs, preventive maintenance, and responding quickly to urgent technical issues. By keeping the gym’s environment well-maintained, safe, and reliable, the Technician Team contributes directly to the overall member experience and operational efficiency. <br>I. Duties and Responsibilities: <br>1. General Repairs and Maintenance <br>• Perform routine inspections of gym equipment, lighting, and electrical systems (Checklist) <br>• Carry out minor repairs, adjustments, and installations as needed for machines, and facilities & infrastructure. <br>• Report major issues or recurring faults to the Management. <br>• Assemble new machines where applicable in the workplace. <br>2. Preventive Maintenance <br>• Follow the scheduled maintenance plan to minimize equipment downtime. <br>• Lubricate, tighten, and test gym machines and utilities regularly. <br>• Record all performed tasks in the maintenance logbook. <br>• Assist in setting up safety signage during repair works. <br>3. Facility Upkeep <br>• Support the safety of the gym areas, including locker rooms, showers, and training spaces. <br>• Assist in moving, assembling, or installing gym equipment and furniture in the club. <br>• Respond promptly to facility-related complaints or urgent repair needs from staff or members. <br>• Support the manager when receiving new machine related shipments <br>4. Safety and Compliance <br>• Ensure maintenance work complies with health and safety standards. <br>• Wear protective gear and follow safe handling procedures when using tools and chemicals. <br>• Report hazards, accidents, or unsafe conditions immediately. <br>• Participate in safety training and emergency drills. <br>• Organize the new machine related shipments in the stock <br>II. Required Competencies: <br>• Technical Skills: Basic knowledge of electrical, plumbing, mechanical, and carpentry work. <br>• Reliability: Consistent follow-through on tasks and responsiveness to urgent needs. <br>• Problem-Solving: Ability to identify issues and apply practical solutions quickly. <br>• Teamwork: Work effectively with other staff, trainers, and management to support smooth operations. <br>• Attention to Detail: Spotting issues before they escalate into larger problems. <br>• Customer Awareness: Understanding that members’ safety and comfort depend on maintenance quality. <br>• Adaptability: Flexibility to switch between tasks and handle unexpected breakdowns. <br>*This job description is a guide to the nature of the work and is not an exhaustive list of duties. The post-holder will be expected to adapt to the changing needs of the business and perform other duties as reasonably requested

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Summary: The Technician team member ensures the gym facilities, equipment, and utilities are fully functional, safe, and well-maintained. This role involves carrying out repairs, preventive maintenance, and responding quickly to urgent technical issues. By keeping the gym s environment well-maintained, safe, and reliable, the Technician Team contributes directly to the overall member experience and operational efficiency.</p><p>I. Duties and Responsibilities:</p><p>1. General Repairs and Maintenance</p><ul><li>Perform routine inspections of gym equipment, lighting, and electrical systems (Checklist)</li><li>Carry out minor repairs, adjustments, and installations as needed for machines, and facilities &amp; infrastructure.</li><li>Report major issues or recurring faults to the Management.</li><li>Assemble new machines where applicable in the workplace.</li></ul><p>2. Preventive Maintenance</p><ul><li>Follow the scheduled maintenance plan to minimize equipment downtime.</li><li>Lubricate, tighten, and test gym machines and utilities regularly.</li><li>Record all performed tasks in the maintenance logbook.</li><li>Assist in setting up safety signage during repair works.</li></ul><p>3. Facility Upkeep</p><ul><li>Support the safety of the gym areas, including locker rooms, showers, and training spaces.</li><li>Assist in moving, assembling, or installing gym equipment and furniture in the club.</li><li>Respond promptly to facility-related complaints or urgent repair needs from staff or members.</li><li>Support the manager when receiving new machine related shipments</li></ul><p>4. Safety and Compliance</p><ul><li>Ensure maintenance work complies with health and safety standards.</li><li>Wear protective gear and follow safe handling procedures when using tools and chemicals.</li><li>Report hazards, accidents, or unsafe conditions immediately.</li><li>Participate in safety training and emergency drills.</li><li>Organize the new machine related shipments in the stock</li></ul><p>II. Required Competencies:</p><p>Technical Skills: Basic knowledge of electrical, plumbing, mechanical, and carpentry work.</p><p>Reliability: Consistent follow-through on tasks and responsiveness to urgent needs.</p><p>Problem-Solving: Ability to identify issues and apply practical solutions quickly.</p><p>Teamwork: Work effectively with other staff, trainers, and management to support smooth operations.</p><p>Attention to Detail: Spotting issues before they escalate into larger problems.</p><p>Customer Awareness: Understanding that members safety and comfort depend on maintenance quality.</p><p>Adaptability: Flexibility to switch between tasks and handle unexpected breakdowns.</p><p>*This job description is a guide to the nature of the work and is not an exhaustive list of duties. The post-holder will be expected to adapt to the changing needs of the business and perform other duties as reasonably requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Basic knowledge of electrical, plumbing, mechanical, and carpentry work.</li><li>Consistent follow-through on tasks and responsiveness to urgent needs.</li><li>Ability to identify issues and apply practical solutions quickly.</li><li>Work effectively with other staff, trainers, and management to support smooth operations.</li><li>Spotting issues before they escalate into larger problems.</li><li>Understanding that members safety and comfort depend on maintenance quality.</li><li>Flexibility to switch between tasks and handle unexpected breakdowns.</li></ul><p></p></section>

<p><h4>Purpose</h4> <p>Automation technicians will be responsible for supporting our project managers and system engineers with creating, installing, and commissioning of PLC/HMI/SCADA based systems as well as network and device integration work.</p> <h4>Essential functions and responsibilities</h4> <p>The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned.</p> <ul> <li>Complete start up and commissioning of new PLC/HMI/SCADA control systems, service and maintenance of existing installations, fault diagnoses, hardware repairs, programming bug fixes and alterations on customer sites</li> <li>Complete diagnosing and resolving technical problems on job sites and provide appropriate reports to project management or operations leaders via email, SharePoint, OneDrive, or other repository applications</li> <li>Attend and participate in project kickoff and turnover meetings with project managers to gain knowledge of project estimate, scope and finalize project completion documentation</li> <li>Organize and maintain control submittal project redlines and submit to design engineer at project conclusion for as built drawing package creation</li> <li>Work with other technicians to develop and share technical solutions</li> <li>Actively participate in technician training to maintain technical expertise on new products, tools, and integration through continuing education initiatives</li> </ul> <h4>Minimum education & experience required to perform essential functions</h4> <ul> <li>Associate’s degree specialized in robotics, automation, technology or minimum of 3-5 years of experience with PLC/HMI control system in lieu of associate’s degree</li> <li>Or bachelor’s degree specialized in technology, engineering, manufacturing</li> </ul> <h4>Mental and physical competencies required to perform essential functions</h4> <ul> <li>Working knowledge of at least one PLC software (i.e. Rockwell Suite, Modicon Unity Pro or Control Expert, Mitsubishi, or many others)</li> <li>Working knowledge of at least one HMI software (i.e. Rockwell FactoryTalk View or Wonderware InTouch, or many others)</li> <li>Working SCADA knowledge of at least one platform (i.e. Ignition, Factory Talk View SE, Optix, GE iFix, Ecostruxure Power Operations or SCADA, and many others)</li> <li>Knowledge of common Windows Office applications and repositories (i.e. OneDrive, SharePoint, GIT)</li> <li>Knowledge of Microsoft SQL or other database applications but not required</li> <li>Knowledge of Ethernet and serial network communication formats and hardware configurations</li> <li>Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices)</li> <li>Excellent interpersonal skills with ability to communicate effectively, both orally and written</li> <li>Ability to travel to customer locations for overnight work approximately 25%</li> </ul> <h4>Environmental adaptability</h4> <ul> <li>Prolonged periods of sitting at a desk working on a computer</li> <li>Must be able to lift 20 pounds occasionally</li> <li>Significant field and client interactions on construction job sites, which may require prolonged periods of standing, walking and/or climbing stairs</li> <li>Occasional exposure to variety of temperature and weather conditions</li> </ul> <h4>Equipment/tools</h4> <ul> <li>Laptop computer</li> </ul> <p><strong>Equal opportunity employer statement:</strong> We are an equal opportunity employer. In compliance with the Americans with Disabilities Act, we will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the employer.</p></p><p></p>

<p><h4>Purpose</h4> <p>Automation technicians will be responsible for supporting our project managers and system engineers with creating, installing, and commissioning of PLC/HMI/SCADA based systems as well as network and device integration work.</p> <h4>Essential functions and responsibilities</h4> <p>The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned.</p> <ul> <li>Complete start up and commissioning of new PLC/HMI/SCADA control systems, service and maintenance of existing installations, fault diagnoses, hardware repairs, programming bug fixes and alterations on customer sites</li> <li>Complete diagnosing and resolving technical problems on job sites and provide appropriate reports to project management or operations leaders via email, SharePoint, OneDrive, or other repository applications</li> <li>Attend and participate in project kickoff and turnover meetings with project managers to gain knowledge of project estimate, scope and finalize project completion documentation</li> <li>Organize and maintain control submittal project redlines and submit to design engineer at project conclusion for as built drawing package creation</li> <li>Work with other technicians to develop and share technical solutions</li> <li>Actively participate in technician training to maintain technical expertise on new products, tools, and integration through continuing education initiatives</li> </ul> <h4>Minimum education & experience required to perform essential functions</h4> <ul> <li>Associate’s degree specialized in robotics, automation, technology or minimum of 3-5 years of experience with PLC/HMI control system in lieu of associate’s degree</li> <li>Or bachelor’s degree specialized in technology, engineering, manufacturing</li> </ul> <h4>Mental and physical competencies required to perform essential functions</h4> <ul> <li>Working knowledge of at least one PLC software (i.e. Rockwell Suite, Modicon Unity Pro or Control Expert, Mitsubishi, or many others)</li> <li>Working knowledge of at least one HMI software (i.e. Rockwell FactoryTalk View or Wonderware InTouch, or many others)</li> <li>Working SCADA knowledge of at least one platform (i.e. Ignition, Factory Talk View SE, Optix, GE iFix, Ecostruxure Power Operations or SCADA, and many others)</li> <li>Knowledge of common Windows Office applications and repositories (i.e. OneDrive, SharePoint, GIT)</li> <li>Knowledge of Microsoft SQL or other database applications but not required</li> <li>Knowledge of Ethernet and serial network communication formats and hardware configurations</li> <li>Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices)</li> <li>Excellent interpersonal skills with ability to communicate effectively, both orally and written</li> <li>Ability to travel to customer locations for overnight work approximately 25%</li> </ul> <h4>Environmental adaptability</h4> <ul> <li>Prolonged periods of sitting at a desk working on a computer</li> <li>Must be able to lift 20 pounds occasionally</li> <li>Significant field and client interactions on construction job sites, which may require prolonged periods of standing, walking and/or climbing stairs</li> <li>Occasional exposure to variety of temperature and weather conditions</li> </ul> <h4>Equipment/tools</h4> <ul> <li>Laptop computer</li> </ul> <p><strong>Equal opportunity employer statement:</strong> We are an equal opportunity employer. In compliance with the Americans with Disabilities Act, we will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the employer.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Description:Food / Grain Analysis Technician</p><p>Job Purpose</p><p>To collect, prepare, and conduct daily laboratory tests (chemical and physical) with high accuracy and efficiency, ensuring that raw materials and finished products comply with standard specifications and approved quality benchmarks, while preparing periodic result reports.</p><p>Key Responsibilities</p><p>Sample Management: Collect, classify, store, and document samples from production lines, warehouses, or incoming raw materials safely.</p><p>Testing &amp; Analysis: Operate laboratory equipment and perform physical and chemical tests in accordance with quality plans and protocols.</p><p>Data Logging &amp; Documentation: Accurately and immediately record test results into electronic systems and approved paper logs.</p><p>Calibration &amp; Maintenance: Perform routine calibration of laboratory instruments to ensure accuracy, and maintain the cleanliness of tools and equipment.</p><p>Non-Conformance Reporting: Identify any non-compliant samples and immediately report them to the Quality Supervisor or Production Manager for corrective action.</p><p>Inventory Control: Monitor the stock of chemicals, reagents, and lab consumables, and request replenishments before depletion.</p><p>Occupational Safety: Strictly adhere to laboratory safety and occupational health standards when handling chemical or sensitive materials.</p><p>Reporting &amp; Relations</p><p>Direct Supervisor: Laboratory Supervisor / Quality Manager.</p><p>Internal Coordination: Continuous and effective communication with the Production and Warehouse teams.</p><p>Employment Terms &amp; Conditions</p><p>Location: Bourj El Barajneh, Beirut, Lebanon.</p><p>Working Hours:</p><p>Monday to Friday: 2:00 PM to 10:00 PM (14:00 - 22:00).</p><p>Saturday: 2:00 PM to 8:00 PM (14:00 - 20:00).</p><p>Salary: $700 USD per month.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualifications &amp; Skills</p><p>Education: Diploma or Bachelor s degree in Chemistry, Biology, Food Science, Laboratory Technology, or a related field.</p><p>Experience: 0 to 3 years of experience in laboratory work or Quality Control (QC).</p><p>Technical Skills: Sound knowledge of laboratory testing methodologies and equipment operation (e.g., moisture analyzers).</p><p>Soft Skills: High attention to detail, strong organizational and documentation skills, and the ability to work efficiently under pressure.</p><p>Computer Skills: Proficiency in basic computer applications (MS Office) for data entry and reporting.</p><p></p></section>

<p><h4>Job description</h4> <p>Now hiring apartment maintenance technicians! Put your maintenance skills to work! We are currently hiring apartment maintenance technicians for communities near you. We are seeking motivated, quick learners with a positive attitude to join our team.</p> <p>If you're dependable, eager to grow, and ready to contribute to well-maintained apartment communities, we encourage you to apply today and start building your career in property management!</p> <h4>Why join us?</h4> <ul> <li>Fast and simple hiring process—apply online today!</li> <li>Opportunities for permanent placement</li> <li>Referral bonuses for bringing in new talent</li> <li>Immediate job placement at great communities</li> </ul> <p>As a maintenance technician, you'll address service requests and maintain the community at the direction of the maintenance supervisor or property manager.</p> <h4>Primary responsibilities include:</h4> <ul> <li>Complete service tickets and work orders efficiently and accurately</li> <li>Prepare vacant apartments for new residents by managing the turnover process</li> <li>Keep grounds and common areas clean and free of debris</li> <li>Deliver exceptional customer service</li> <li>Perform electrical, plumbing, appliance, and carpentry repairs, including:</li> <ul> <li>Repairing electrical circuits, switches, and breakers</li> <li>Servicing and installing light fixtures and appliances (stoves, refrigerators, washers, dryers)</li> <li>Fixing and replacing toilets, sinks, vanities, disposals, and caulking</li> <li>Handling minor carpentry repairs, including doors, window screens, and blinds</li> <li>Painting and drywall repair as needed</li> <li>Removing bulk trash, including discarded appliances</li> <li>Clearing drains and sewer lines (up to 4 feet)</li> </ul> </ul> <p>Start working fast with us—apply today!</p> <h4>Requirements:</h4> <ul> <li>Basic knowledge of maintenance repair and service across multiple areas</li> <li>Previous apartment maintenance experience</li> <li>HVAC certification is a plus</li> <li>Capable of lifting up to 40 pounds and safely using ladders</li> <li>Strong verbal and written communication skills</li> <li>Ability to work weekends as required</li> </ul> <p>We are a leading staffing provider to the property management industry. We are always looking for excellent candidates to fill client positions as they become available.</p> <p>We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran or military status, or any other characteristic protected by law.</p></p><p></p>

<p><h4>Job description</h4> <p>Now hiring apartment maintenance technicians! Put your maintenance skills to work! We are currently hiring apartment maintenance technicians for communities near you. We are seeking motivated, quick learners with a positive attitude to join our team.</p> <p>If you're dependable, eager to grow, and ready to contribute to well-maintained apartment communities, we encourage you to apply today and start building your career in property management!</p> <h4>Why join us?</h4> <ul> <li>Fast and simple hiring process—apply online today!</li> <li>Opportunities for permanent placement</li> <li>Referral bonuses for bringing in new talent</li> <li>Immediate job placement at great communities</li> </ul> <p>As a maintenance technician, you'll address service requests and maintain the community at the direction of the maintenance supervisor or property manager.</p> <h4>Primary responsibilities include:</h4> <ul> <li>Complete service tickets and work orders efficiently and accurately</li> <li>Prepare vacant apartments for new residents by managing the turnover process</li> <li>Keep grounds and common areas clean and free of debris</li> <li>Deliver exceptional customer service</li> <li>Perform electrical, plumbing, appliance, and carpentry repairs, including:</li> <ul> <li>Repairing electrical circuits, switches, and breakers</li> <li>Servicing and installing light fixtures and appliances (stoves, refrigerators, washers, dryers)</li> <li>Fixing and replacing toilets, sinks, vanities, disposals, and caulking</li> <li>Handling minor carpentry repairs, including doors, window screens, and blinds</li> <li>Painting and drywall repair as needed</li> <li>Removing bulk trash, including discarded appliances</li> <li>Clearing drains and sewer lines (up to 4 feet)</li> </ul> </ul> <p>Start working fast with us—apply today!</p> <h4>Requirements:</h4> <ul> <li>Basic knowledge of maintenance repair and service across multiple areas</li> <li>Previous apartment maintenance experience</li> <li>HVAC certification is a plus</li> <li>Capable of lifting up to 40 pounds and safely using ladders</li> <li>Strong verbal and written communication skills</li> <li>Ability to work weekends as required</li> </ul> <p>We are a leading staffing provider to the property management industry. We are always looking for excellent candidates to fill client positions as they become available.</p> <p>We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran or military status, or any other characteristic protected by law.</p></p><p></p>