Electronics Engineer Jobs - Tripoli Lebanon

MAIN DUTIES AND RESPONSIBILITIES: <br>• Supervise daily site activities related to CCTV, access control, alarm, intercom, networking, structured cabling, and other ELV systems. <br>• Lead and distribute daily tasks among technicians and subcontractors according to the approved work plan. <br>• Ensure that installations comply with approved drawings, BOQ, technical specifications, and company standards. <br>• Review site layouts, shop drawings, cable schedules, network diagrams, and system requirements before execution. <br>• Supervise cable pulling, termination, labeling, testing, device installation, rack arrangement, and network connections. <br>• Configure and troubleshoot IP cameras, NVRs, switches, routers, access points, access control panels, intercoms, and alarm systems. <br>• Assign IP addresses and ensure proper network connectivity, device communication, and remote access. <br>• Coordinate with Project Coordinator, technical team, clients, suppliers, warehouse, and other site contractors. <br>• Submit and follow up on material requests and report missing, damaged, or incorrect materials. <br>• Monitor technicians’ performance, work quality, productivity, attendance, and compliance with safety procedures. <br>• Conduct site inspections and identify installation issues, technical obstacles, and required corrective actions. <br>• Prepare daily site reports, completed-work records, testing results, material usage reports, and progress updates. <br>• Coordinate testing, commissioning, system integration, client demonstrations, and final handover activities. <br>• Ensure that all cables, devices, racks, and system components are properly installed, labeled, tested, and documented. <br>• Maintain updated records of device IP addresses, passwords, configurations, serial numbers, and network connections. <br>• Provide technical guidance and on-site training to technicians when required. <br>• Ensure that tools, testing equipment, and company assets are properly used and maintained. <br>• Support preventive and corrective maintenance activities for installed ELV systems. <br>• Ensure that all pending remarks, testing records, as-built drawings, and handover requirements are completed before project closure. <br> <br> EDUCATION, EXPERIENCE, AND SKILLS: <br>• Bachelor’s degree or technical diploma in Information Technology, Computer Engineering, Networking, Telecommunications, Electronics, or a related field. <br>• Minimum of 3 years of practical experience in ELV system installation, supervision, configuration, and troubleshooting. <br>• Strong IT and networking background, including TCP/IP, subnetting, IP addressing, switches, routers, VLANs, Wi-Fi, and remote access. <br>• Good technical knowledge of CCTV, NVRs, access control, intrusion alarm, fire alarm, intercom, structured cabling, and related systems. <br>• Ability to read ELV drawings, layouts, network diagrams, BOQ, datasheets, and technical manuals. <br>• Practical experience with cable termination, testing equipment, racks, patch panels, fiber optics, and network cabling is preferred. <br>• Strong leadership and ability to supervise technicians, subcontractors, and daily site activities. <br>• Good coordination, reporting, communication, troubleshooting, and problem-solving skills. <br>• Ability to manage multiple tasks, prioritize site activities, and meet project deadlines. <br>• Good knowledge of Microsoft Office; ERP/Odoo experience is an advantage. <br>• Strong attention to detail and the ability to work under pressure and at different project sites. <br>• Fluency in Arabic and good command of English; French is an advantage

MAIN DUTIES AND RESPONSIBILITIES: <br>• Supervise daily site activities related to CCTV, access control, alarm, intercom, networking, structured cabling, and other ELV systems. <br>• Lead and distribute daily tasks among technicians and subcontractors according to the approved work plan. <br>• Ensure that installations comply with approved drawings, BOQ, technical specifications, and company standards. <br>• Review site layouts, shop drawings, cable schedules, network diagrams, and system requirements before execution. <br>• Supervise cable pulling, termination, labeling, testing, device installation, rack arrangement, and network connections. <br>• Configure and troubleshoot IP cameras, NVRs, switches, routers, access points, access control panels, intercoms, and alarm systems. <br>• Assign IP addresses and ensure proper network connectivity, device communication, and remote access. <br>• Coordinate with Project Coordinator, technical team, clients, suppliers, warehouse, and other site contractors. <br>• Submit and follow up on material requests and report missing, damaged, or incorrect materials. <br>• Monitor technicians’ performance, work quality, productivity, attendance, and compliance with safety procedures. <br>• Conduct site inspections and identify installation issues, technical obstacles, and required corrective actions. <br>• Prepare daily site reports, completed-work records, testing results, material usage reports, and progress updates. <br>• Coordinate testing, commissioning, system integration, client demonstrations, and final handover activities. <br>• Ensure that all cables, devices, racks, and system components are properly installed, labeled, tested, and documented. <br>• Maintain updated records of device IP addresses, passwords, configurations, serial numbers, and network connections. <br>• Provide technical guidance and on-site training to technicians when required. <br>• Ensure that tools, testing equipment, and company assets are properly used and maintained. <br>• Support preventive and corrective maintenance activities for installed ELV systems. <br>• Ensure that all pending remarks, testing records, as-built drawings, and handover requirements are completed before project closure. <br>REGULATORY REQUIREMENTS, EDUCATION, EXPERIENCE, AND SKILLS: <br>• Bachelor’s degree or technical diploma in Information Technology, Computer Engineering, Networking, Telecommunications, Electronics, or a related field. <br>• Minimum of 3 years of practical experience in ELV system installation, supervision, configuration, and troubleshooting. <br>• Strong IT and networking background, including TCP/IP, subnetting, IP addressing, switches, routers, VLANs, Wi-Fi, and remote access. <br>• Good technical knowledge of CCTV, NVRs, access control, intrusion alarm, fire alarm, intercom, structured cabling, and related systems. <br>• Ability to read ELV drawings, layouts, network diagrams, BOQ, datasheets, and technical manuals. <br>• Practical experience with cable termination, testing equipment, racks, patch panels, fiber optics, and network cabling is preferred. <br>• Strong leadership and ability to supervise technicians, subcontractors, and daily site activities. <br>• Good coordination, reporting, communication, troubleshooting, and problem-solving skills. <br>• Ability to manage multiple tasks, prioritize site activities, and meet project deadlines. <br>• Good knowledge of Microsoft Office; ERP/Odoo experience is an advantage. <br>• Strong attention to detail and the ability to work under pressure and at different project sites. <br>• Fluency in Arabic and good command of English; French is an advantage

Electrical Site Engineer (5 years experience) Junior MEP Mechanical Site Engineer <br> <br>At least 1-5 years of experience in Site Work projects (HVAC specially in VRV or VRF is a Plus, Firefighting, Plumbing). <br>Previous Experience in Electromechanical Contracting or in a Construction Company is a MUST <br>Graduated from Mechanical Engineering is a MUST <br>Good in AutoCAD and other relevant engineering software <br>Excellent problem-solving and decision-making skills <br>Strong organizational and time-management abilities <br>Ability to work independently and as part of a team <br> <br>CVs TO ( hebeiconstructiongroup970@gmail.com )

Position Data: <br>Job Title: HVAC Sales Engineer <br> <br>Department: Sales <br> <br>Relationship <br>Reporting to: Managing Partners <br> <br>Liaison: Internal: Managing Partners, Sales Engineers, Application Engineer, Sales Team, Procurement, Accounting, Warehouse, Operations <br> External: Customers, Consultants, Contractors, Developers, Owners rep., Public sector parties, Installers, Maintenance team, competitors <br> <br> <br>Basic Function: <br>To achieve the sales and receivables targets set by the sales Engineer and the company with specified Gross Margin contribution in line with the company’s policies for meeting the company business requirements. <br> <br>Key Performance Areas: <br>Sales Functions: <br>• To scan the market within assigned territories for identifying and developing customers’ relationships and generating sales <br>• To respond to customers’ enquiries on time with the right selection of products which meet the customers’ technical requirement and offering a tailor-made solution <br>• To make proper selection of materials as per projects / customers’ requirements and get necessary approvals from the Management <br>• To follow up quotations with technical and commercial support to insure placing orders and following up until goods are delivered to destinations <br>• To provide the management with competitions’ information about their products and markets to adjust the sales strategy accordingly <br>• To Collect Receivables relative to the executed sales and deliveries of materials as per agreed payment terms <br>  <br>Customers’ Relationship: <br>• To visit and market the products at the consultants with technical and commercial presentations to answer all questions relative to the acceptability of the products and their nomination for commercial projects <br>• To commercialize the Products at customers’ premises to ensure that sales deals are closed <br>• To answer effectively to customers’ calls and inquiries with exquisite pleasance and professionalism within acceptable time frame <br>• To ensure continuous follow up and personal conduct with all customers to enhance customers’ satisfaction and increase the sales volume <br>• To attend and solve promptly customers’ complaints within an acceptable time frame <br> <br> <br>Office Management: <br>• To compute and promptly update all leads, opportunities & customers in the ERP system for proper follow up <br>• To process the quotations and orders in the ERP as per the nature of the job. When necessary, coordinate with Management for initiating procurement of items/goods from Suppliers <br>• To be responsible for accurate preparation of all documents such as quotations, sales orders, delivery forms, invoices, receipts etc. <br>• To coordinate with Suppliers of materials in terms of Technical Compliance of their products and Services with the market / projects’ requirements <br>• To maintain adequate sales and receivables closing ratio as per company’s practices <br>• To follow up and to be accountable for pending receivables from customers <br>• To coordinate with customers and warehouse for accurate delivery of materials <br> <br> <br>Core Competency Level: <br>Qualifications: Bachelors’ Degree in Mechanical Engineering <br> <br>Personal Details Around 25 – 35 years <br> <br>Knowledge: Thorough knowledge and Experience in Electro-mechanical products focus on HVAC systems, selections, designs and applications, Pumps, Plumbing and the Lebanese market including Consultants, Contractors, Developers, Traders. <br> <br>Skills: 3 to 7 years’ relevant experience <br>Excellent communication and inter-personal skills, a team-player, excellent negotiations and computer skills, good behavior, well mannered, pleasing and strong personality

MAIN DUTIES AND RESPONSIBILITIES: <br>• Conduct regular quality inspections on sites, projects, installations, and technical works to <br>ensure compliance with approved standards and specifications. <br>• Monitor installation activities and verify that work is executed according to drawings, technical <br>requirements, and company procedures. <br>• Perform site visits to check workmanship, materials, safety practices, and overall project <br>quality. <br>• Review project documents, technical drawings, BOQs, specifications, and inspection <br>requirements. <br>• Prepare quality inspection reports, site observation reports, and non-conformance reports when <br>required. <br>• Identify quality issues, document findings, and follow up with responsible teams to implement <br>corrective actions. <br>• Coordinate with project managers, engineers, technicians, suppliers, and subcontractors to <br>resolve quality-related issues. <br>• Verify incoming materials, equipment, and products according to specifications before <br>installation or use. <br>• Perform random checks on completed works, installations, and delivered projects before final <br>handover. <br>• Ensure that corrective and preventive actions (CAPA) are properly implemented and closed. <br>• Maintain quality records, inspection checklists, reports, and project documentation. <br>• Assist in developing and improving quality control procedures, checklists, and internal <br>standards. <br>• Support engineering and operations teams in improving installation methods and reducing <br>repeated issues. <br>• Follow up on customer complaints related to technical quality and coordinate solutions with <br>responsible departments. <br>• Conduct audits on operational processes, warehouses, installations, and service activities when <br>required. <br>• Ensure compliance with company policies, safety procedures, and technical standards. <br>• Support project teams during testing, commissioning, and handover stages. <br>• Coordinate with suppliers and manufacturers regarding technical quality issues and product <br>concerns. <br>• Assist in preparing quality presentations, reports, and improvement recommendations for <br>management. <br>• Monitor field teams' performance and provide feedback regarding quality standards. <br>• Perform any additional quality-related tasks assigned by management. <br>REGULATORY REQUIREMENTS, EDUCATION, EXPERIENCE, AND SKILLS: <br>• Bachelor’s degree in Engineering (Electrical, Mechanical, Civil, Industrial) or related technical <br>field. <br>• Minimum 2–3 years of experience in Quality Control, Site Engineering, Project Coordination, <br>or Technical Inspection. <br>• Previous experience working in an engineering company, construction company, contracting <br>company, or technical projects is highly preferred. <br>• Experience with site inspections, installation supervision, and project documentation is an <br>advantage. <br>• Good understanding of technical drawings, specifications, BOQs, and project requirements. <br>• Knowledge of quality standards, inspection procedures, and reporting methods. <br>• Strong attention to detail and ability to identify technical issues. <br>• Good problem-solving and analytical skills. <br>• Ability to prepare professional reports and documentation. <br>• Strong communication skills with engineers, technicians, suppliers, and contractors. <br>• Ability to work on-site and coordinate with multiple teams. <br>• Good knowledge of Microsoft Office applications (Excel, Word, PowerPoint). <br>• Familiarity with ERP, project management, ticketing, or documentation systems is an <br>advantage. <br>• Fluency in Arabic and English; French is an advantage. <br>• Ability to work under pressure and manage multiple projects simultaneously

Responsible for ensuring that company projects, installations, products, and operational processes meet the required quality standards and technical specifications. The role includes conducting inspections, monitoring site activities, reviewing documentation, coordinating with engineering and project teams, identifying quality issues, and ensuring corrective actions are implemented. The position supports continuous improvement by maintaining quality procedures, reports, and compliance with company standards. <br> <br>MAIN DUTIES AND RESPONSIBILITIES: <br> <br>• Conduct regular quality inspections on sites, projects, installations, and technical works to ensure compliance with approved standards and specifications. <br>• Monitor installation activities and verify that work is executed according to drawings, technical requirements, and company procedures. <br>• Perform site visits to check workmanship, materials, safety practices, and overall project quality. <br>• Review project documents, technical drawings, BOQs, specifications, and inspection requirements. <br>• Prepare quality inspection reports, site observation reports, and non-conformance reports when required. <br>• Identify quality issues, document findings, and follow up with responsible teams to implement corrective actions. <br>• Coordinate with project managers, engineers, technicians, suppliers, and subcontractors to resolve quality-related issues. <br>• Verify incoming materials, equipment, and products according to specifications before installation or use. <br>• Perform random checks on completed works, installations, and delivered projects before final handover. <br>• Ensure that corrective and preventive actions (CAPA) are properly implemented and closed. <br>• Maintain quality records, inspection checklists, reports, and project documentation. <br>• Assist in developing and improving quality control procedures, checklists, and internal standards. <br>• Support engineering and operations teams in improving installation methods and reducing repeated issues. <br>• Follow up on customer complaints related to technical quality and coordinate solutions with responsible departments. <br>• Conduct audits on operational processes, warehouses, installations, and service activities when required. <br>• Ensure compliance with company policies, safety procedures, and technical standards. <br>• Support project teams during testing, commissioning, and handover stages. <br>• Coordinate with suppliers and manufacturers regarding technical quality issues and product concerns. <br>• Assist in preparing quality presentations, reports, and improvement recommendations for management. <br>• Monitor field teams' performance and provide feedback regarding quality standards. <br>• Perform any additional quality-related tasks assigned by management. <br> <br>REGULATORY REQUIREMENTS, EDUCATION, EXPERIENCE, AND SKILLS: <br> <br>• Bachelor’s degree in Engineering (Electrical, Mechanical, Civil, Industrial) or related technical field. <br>• Minimum 2–3 years of experience in Quality Control, Site Engineering, Project Coordination, or Technical Inspection. <br>• Previous experience working in an engineering company, construction company, contracting company, or technical projects is highly preferred. <br>• Experience with site inspections, installation supervision, and project documentation is an advantage. <br>• Good understanding of technical drawings, specifications, BOQs, and project requirements. <br>• Knowledge of quality standards, inspection procedures, and reporting methods. <br>• Strong attention to detail and ability to identify technical issues. <br>• Good problem-solving and analytical skills. <br>• Ability to prepare professional reports and documentation. <br>• Strong communication skills with engineers, technicians, suppliers, and contractors. <br>• Ability to work on-site and coordinate with multiple teams. <br>• Good knowledge of Microsoft Office applications (Excel, Word, PowerPoint). <br>• Familiarity with ERP, project management, ticketing, or documentation systems is an advantage. <br>• Fluency in Arabic and English; French is an advantage. <br>• Ability to work under pressure and manage multiple projects simultaneously

Responsible for ensuring that company projects, installations, products, and operational processes meet the required quality standards and technical specifications. The role includes conducting inspections, monitoring site activities, reviewing documentation, coordinating with engineering and project teams, identifying quality issues, and ensuring corrective actions are implemented. The position supports continuous improvement by maintaining quality procedures, reports, and compliance with company standards. <br> <br>MAIN DUTIES AND RESPONSIBILITIES: <br> <br>• Conduct regular quality inspections on sites, projects, installations, and technical works to ensure compliance with approved standards and specifications. <br>• Monitor installation activities and verify that work is executed according to drawings, technical requirements, and company procedures. <br>• Perform site visits to check workmanship, materials, safety practices, and overall project quality. <br>• Review project documents, technical drawings, BOQs, specifications, and inspection requirements. <br>• Prepare quality inspection reports, site observation reports, and non-conformance reports when required. <br>• Identify quality issues, document findings, and follow up with responsible teams to implement corrective actions. <br>• Coordinate with project managers, engineers, technicians, suppliers, and subcontractors to resolve quality-related issues. <br>• Verify incoming materials, equipment, and products according to specifications before installation or use. <br>• Perform random checks on completed works, installations, and delivered projects before final handover. <br>• Ensure that corrective and preventive actions (CAPA) are properly implemented and closed. <br>• Maintain quality records, inspection checklists, reports, and project documentation. <br>• Assist in developing and improving quality control procedures, checklists, and internal standards. <br>• Support engineering and operations teams in improving installation methods and reducing repeated issues. <br>• Follow up on customer complaints related to technical quality and coordinate solutions with responsible departments. <br>• Conduct audits on operational processes, warehouses, installations, and service activities when required. <br>• Ensure compliance with company policies, safety procedures, and technical standards. <br>• Support project teams during testing, commissioning, and handover stages. <br>• Coordinate with suppliers and manufacturers regarding technical quality issues and product concerns. <br>• Assist in preparing quality presentations, reports, and improvement recommendations for management. <br>• Monitor field teams' performance and provide feedback regarding quality standards. <br>• Perform any additional quality-related tasks assigned by management. <br> <br>REGULATORY REQUIREMENTS, EDUCATION, EXPERIENCE, AND SKILLS: <br> <br>• Bachelor’s degree in Engineering (Electrical, Mechanical, Civil, Industrial) or related technical field. <br>• Minimum 2–3 years of experience in Quality Control, Site Engineering, Project Coordination, or Technical Inspection. <br>• Previous experience working in an engineering company, construction company, contracting company, or technical projects is highly preferred. <br>• Experience with site inspections, installation supervision, and project documentation is an advantage. <br>• Good understanding of technical drawings, specifications, BOQs, and project requirements. <br>• Knowledge of quality standards, inspection procedures, and reporting methods. <br>• Strong attention to detail and ability to identify technical issues. <br>• Good problem-solving and analytical skills. <br>• Ability to prepare professional reports and documentation. <br>• Strong communication skills with engineers, technicians, suppliers, and contractors. <br>• Ability to work on-site and coordinate with multiple teams. <br>• Good knowledge of Microsoft Office applications (Excel, Word, PowerPoint). <br>• Familiarity with ERP, project management, ticketing, or documentation systems is an advantage. <br>• Fluency in Arabic and English; French is an advantage. <br>• Ability to work under pressure and manage multiple projects simultaneously

MAIN DUTIES AND RESPONSIBILITIES: <br> <br>• Conduct regular quality inspections on sites, projects, installations, and technical works to ensure compliance with approved standards and specifications. <br>• Monitor installation activities and verify that work is executed according to drawings, technical requirements, and company procedures. <br>• Perform site visits to check workmanship, materials, safety practices, and overall project quality. <br>• Review project documents, technical drawings, BOQs, specifications, and inspection requirements. <br>• Prepare quality inspection reports, site observation reports, and non-conformance reports when required. <br>• Identify quality issues, document findings, and follow up with responsible teams to implement corrective actions. <br>• Coordinate with project managers, engineers, technicians, suppliers, and subcontractors to resolve quality-related issues. <br>• Verify incoming materials, equipment, and products according to specifications before installation or use. <br>• Perform random checks on completed works, installations, and delivered projects before final handover. <br>• Ensure that corrective and preventive actions (CAPA) are properly implemented and closed. <br>• Maintain quality records, inspection checklists, reports, and project documentation. <br>• Assist in developing and improving quality control procedures, checklists, and internal standards. <br>• Support engineering and operations teams in improving installation methods and reducing repeated issues. <br>• Follow up on customer complaints related to technical quality and coordinate solutions with responsible departments. <br>• Conduct audits on operational processes, warehouses, installations, and service activities when required. <br>• Ensure compliance with company policies, safety procedures, and technical standards. <br>• Support project teams during testing, commissioning, and handover stages. <br>• Coordinate with suppliers and manufacturers regarding technical quality issues and product concerns. <br>• Assist in preparing quality presentations, reports, and improvement recommendations for management. <br>• Monitor field teams' performance and provide feedback regarding quality standards. <br>• Perform any additional quality-related tasks assigned by management. <br> <br>REGULATORY REQUIREMENTS, EDUCATION, EXPERIENCE, AND SKILLS: <br> <br>• Bachelor’s degree in Engineering (Electrical, Mechanical, Civil, Industrial) or related technical field. <br>• Minimum 2–3 years of experience in Quality Control, Site Engineering, Project Coordination, or Technical Inspection. <br>• Previous experience working in an engineering company, construction company, contracting company, or technical projects is highly preferred. <br>• Experience with site inspections, installation supervision, and project documentation is an advantage. <br>• Good understanding of technical drawings, specifications, BOQs, and project requirements. <br>• Knowledge of quality standards, inspection procedures, and reporting methods. <br>• Strong attention to detail and ability to identify technical issues. <br>• Good problem-solving and analytical skills. <br>• Ability to prepare professional reports and documentation. <br>• Strong communication skills with engineers, technicians, suppliers, and contractors. <br>• Ability to work on-site and coordinate with multiple teams. <br>• Good knowledge of Microsoft Office applications (Excel, Word, PowerPoint). <br>• Familiarity with ERP, project management, ticketing, or documentation systems is an advantage. <br>• Fluency in Arabic and English; French is an advantage. <br>• Ability to work under pressure and manage multiple projects simultaneously

MAIN DUTIES AND RESPONSIBILITIES: <br>• Supervise daily site activities related to solar PV systems, inverters, batteries, electrical panels, protection systems, and associated electrical works. <br>• Lead technicians and subcontractors and assign their daily tasks according to the approved work plan. <br>• Ensure installations comply with approved drawings, BOQ, technical specifications, and company standards. <br>• Review single-line diagrams, electrical layouts, cable schedules, load calculations, datasheets, and site requirements before execution. <br>• Supervise the installation of solar panels, mounting structures, inverters, batteries, electrical panels, cables, earthing, and protection devices. <br>• Ensure correct cable sizing, routing, termination, labeling, polarity, phase distribution, and electrical connections. <br>• Verify proper installation of AC/DC protection devices, circuit breakers, isolators, surge protection, and earthing systems. <br>• Configure and troubleshoot solar inverters, battery systems, monitoring platforms, communication devices, and energy management systems. <br>• Conduct electrical testing, including voltage, current, insulation resistance, continuity, polarity, and earth resistance tests. <br>• Coordinate with the Project Coordinator, Technicians team, clients, suppliers, warehouse, and other site contractors. <br>• Prepare and follow up on material requests and report missing, damaged, or incorrect materials. <br>• Monitor technicians’ performance, work quality, productivity, attendance, and compliance with safety procedures. <br>• Conduct site inspections and identify technical issues, installation errors, risks, and required corrective actions. <br>• Prepare daily site reports, testing records, material usage reports, completed-work records, and progress updates. <br>• Coordinate system testing, commissioning, client demonstrations, inspections, and final handover activities. <br>• Ensure all equipment is properly installed, labeled, tested, configured, and documented. <br>• Maintain updated records of inverter settings, battery configurations, monitoring credentials, serial numbers, and testing results. <br>• Provide technical guidance and on-site training to technicians when required. <br>• Ensure tools, testing instruments, safety equipment, and company assets are properly used and maintained. <br>• Support preventive and corrective maintenance for installed renewable energy systems. <br>• Ensure all pending remarks, testing records, as-built drawings, and handover requirements are completed before project closure. <br> <br>REGULATORY REQUIREMENTS, EDUCATION, EXPERIENCE, AND SKILLS: <br>• Bachelor’s degree in Electrical Engineering, Renewable Energy Engineering, or a closely related field. <br>• Minimum of 3 years of practical experience in solar PV, energy storage, electrical installation, supervision, testing, and commissioning. <br>• Strong knowledge of AC and DC electrical systems, solar inverters, lithium batteries, electrical panels, protection systems, and earthing. <br>• Good understanding of on-grid, off-grid, hybrid, residential, commercial, and industrial solar systems. <br>• Ability to read single-line diagrams, electrical layouts, BOQ, cable schedules, datasheets, and technical manuals. <br>• Good knowledge of cable sizing, load calculations, voltage drop, short-circuit protection, phase balancing, and system capacity calculations. <br>• Practical experience with electrical testing instruments, solar monitoring platforms, and inverter configuration tools. <br>• Strong knowledge of electrical safety requirements and safe working procedures. <br>• Strong leadership skills and the ability to supervise technicians, subcontractors, and daily site activities. <br>• Good coordination, reporting, communication, troubleshooting, and problem-solving skills. <br>• Ability to manage multiple tasks, prioritize site activities, and meet project deadlines. <br>• Good knowledge of Microsoft Office; AutoCAD and ERP/Odoo experience are advantages. <br>• Strong attention to detail and the ability to work under pressure and at different project sites. <br>• Fluency in Arabic and good command of English; French is an advantage

MAIN DUTIES AND RESPONSIBILITIES: <br>• Supervise daily site activities related to solar PV systems, inverters, batteries, electrical panels, protection systems, and associated electrical works. <br>• Lead technicians and subcontractors and assign their daily tasks according to the approved work plan. <br>• Ensure installations comply with approved drawings, BOQ, technical specifications, and company standards. <br>• Review single-line diagrams, electrical layouts, cable schedules, load calculations, datasheets, and site requirements before execution. <br>• Supervise the installation of solar panels, mounting structures, inverters, batteries, electrical panels, cables, earthing, and protection devices. <br>• Ensure correct cable sizing, routing, termination, labeling, polarity, phase distribution, and electrical connections. <br>• Verify proper installation of AC/DC protection devices, circuit breakers, isolators, surge protection, and earthing systems. <br>• Configure and troubleshoot solar inverters, battery systems, monitoring platforms, communication devices, and energy management systems. <br>• Conduct electrical testing, including voltage, current, insulation resistance, continuity, polarity, and earth resistance tests. <br>• Coordinate with the Project Coordinator, Technicians team, clients, suppliers, warehouse, and other site contractors. <br>• Prepare and follow up on material requests and report missing, damaged, or incorrect materials. <br>• Monitor technicians’ performance, work quality, productivity, attendance, and compliance with safety procedures. <br>• Conduct site inspections and identify technical issues, installation errors, risks, and required corrective actions. <br>• Prepare daily site reports, testing records, material usage reports, completed-work records, and progress updates. <br>• Coordinate system testing, commissioning, client demonstrations, inspections, and final handover activities. <br>• Ensure all equipment is properly installed, labeled, tested, configured, and documented. <br>• Maintain updated records of inverter settings, battery configurations, monitoring credentials, serial numbers, and testing results. <br>• Provide technical guidance and on-site training to technicians when required. <br>• Ensure tools, testing instruments, safety equipment, and company assets are properly used and maintained. <br>• Support preventive and corrective maintenance for installed renewable energy systems. <br>• Ensure all pending remarks, testing records, as-built drawings, and handover requirements are completed before project closure. <br>REGULATORY REQUIREMENTS, EDUCATION, EXPERIENCE, AND SKILLS: <br>• Bachelor’s degree in Electrical Engineering, Renewable Energy Engineering, or a closely related field. <br>• Minimum of 3 years of practical experience in solar PV, energy storage, electrical installation, supervision, testing, and commissioning. <br>• Strong knowledge of AC and DC electrical systems, solar inverters, lithium batteries, electrical panels, protection systems, and earthing. <br>• Good understanding of on-grid, off-grid, hybrid, residential, commercial, and industrial solar systems. <br>• Ability to read single-line diagrams, electrical layouts, BOQ, cable schedules, datasheets, and technical manuals. <br>• Good knowledge of cable sizing, load calculations, voltage drop, short-circuit protection, phase balancing, and system capacity calculations. <br>• Practical experience with electrical testing instruments, solar monitoring platforms, and inverter configuration tools. <br>• Strong knowledge of electrical safety requirements and safe working procedures. <br>• Strong leadership skills and the ability to supervise technicians, subcontractors, and daily site activities. <br>• Good coordination, reporting, communication, troubleshooting, and problem-solving skills. <br>• Ability to manage multiple tasks, prioritize site activities, and meet project deadlines. <br>• Good knowledge of Microsoft Office; AutoCAD and ERP/Odoo experience are advantages. <br>• Strong attention to detail and the ability to work under pressure and at different project sites. <br>• Fluency in Arabic and good command of English; French is an advantage

MAIN DUTIES AND RESPONSIBILITIES: <br>• Supervise daily service center operations, including repair, maintenance, and after-sales support <br>• Lead and manage a team of technicians, ensuring productivity, accuracy, and adherence to company standards <br>• Monitor service requests, assign tasks, and ensure timely completion of work orders <br>• Monitor warranty claims, repair activities, and preventive maintenance schedules <br>• Supervise workshop operations, spare parts usage, and service quality <br>• Coordinate with procurement and warehouse teams for spare parts availability and stock control <br>• Ensure proper documentation of repairs, warranties, and customer service records in ERP systems (Odoo is a plus) <br>• Provide technical support and resolve escalated customer complaints in a professional manner <br>• Enforce safety, quality, and operational procedures in the service center <br>• Track KPIs such as turnaround time, customer satisfaction, and service quality, and prepare performance reports <br>• Maintain inventory of spare parts and tools, coordinating with the warehouse when needed. <br>• Train and develop technicians to improve technical skills and customer handling <br>• Collaborate with sales and management teams to improve service offerings and client experience <br>• Conduct site visits to apply client requests reparation and ensure good operation. <br> <br> <br>REGULATORY REQUIREMENTS (Education and Experience) and SKILLS: <br>• Bachelor’s degree or technical diploma in Electronics, Electrical Engineering, or related field <br>• Minimum of 5 years of experience in technical service/repair, with at least 2 years in a supervisory role <br>• Strong leadership and team management abilities <br>• Solid knowledge of repair, maintenance, and service procedures (electronics/IT/solar systems background is a plus) <br>• Experience with ERP systems (Odoo preferred) and Microsoft Office Suite <br>• Excellent organizational, problem-solving, and communication skills <br>• Customer-focused mindset with the ability to manage escalations effectively <br>• Fluency in Arabic and English; French is an advantage

JOB DUTIES: <br>•Develop and implement marketing plans and campaigns in coordination with management. <br>•Supervise marketing operations, including advertising, digital marketing, and promotional activities. <br>•Create engaging and original content for social media, website, newsletters, and promotional materials. <br>•Manage the company’s digital presence across social media platforms (Facebook, Instagram, LinkedIn, YouTube, etc.). <br>•Write, edit, and proofread marketing materials to ensure brand consistency and professionalism. <br>•Track and analyze digital performance metrics to optimize engagement and conversion. <br>•Coordinate email marketing campaigns and maintain subscriber databases. <br> <br>EDUCATION & SKILLS: <br>-Bachelor’s degree in Marketing, Business Administration, or a related field. <br>-Creative thinker and a Data lover. <br>- 2+years of experience in marketing roles, preferably within the tech retail or consumer electronics sector. <br>-Strong knowledge of digital marketing tools and platforms, including SEO, SEM, email marketing, and social media advertising. <br>-Ability to lead and mentor a marketing team. <br>-Ability to develop strategic marketing plans that align with business objectives. <br>-Exceptional written and verbal communication skills. <br> <br>WORKING HOURS:: <br>-Monday to Friday from 8:00 till 5:00 pm <br>-Saturday from 8:00am till 2:00 pm

Main Duties and Responsibilities <br>• Receive and register customer service requests, complaints, warranty claims, and repair requests. <br>• Communicate with customers to understand their issues and collect all required product and purchase information. <br>• Coordinate product inspections, repairs, maintenance visits, and installations with service center technicians. <br>• Follow up on each service request from receipt until completion and customer confirmation. <br>• Provide customers with clear updates regarding inspection results, repair status, expected completion dates, costs, and warranty coverage. <br>• Verify warranty eligibility based on invoices, serial numbers, warranty conditions, and company policies. <br>• Prepare service reports, quotations, job cards, delivery notes, and other after-sales documentation. <br>• Maintain accurate records of customer cases, repair history, complaints, and completed services in the company system. <br>• Coordinate with the warehouse and procurement teams regarding spare parts, replacement products, and required tools. <br>• Coordinate with the sales team when customer cases require commercial follow-up or additional product support. <br>• Arrange the receipt and return of customer products and ensure proper documentation and handover. <br>• Follow up with customers after service completion to confirm satisfaction and proper product operation. <br>• Escalate delayed, repeated, or unresolved technical issues to the Service Center Manager. <br>• Prepare periodic reports on open cases, response time, resolution time, recurring issues, and customer satisfaction. <br>• Support continuous improvement initiatives to enhance after-sales service quality, efficiency, and customer experience. <br>• Ensure compliance with company procedures, warranty policies, and customer service standards. <br>Regulatory Requirements — Education and Experience <br>• Diploma or bachelor’s degree in Business Administration, Customer Service, Electronics, , or a related field. <br>• Minimum of 2–3 years of experience in after-sales support, customer service, technical coordination, or a similar role. <br>• Previous experience with inverters, batteries, electronics, security systems, or technical products is preferred. <br>• Basic understanding of technical troubleshooting, repair processes, and warranty procedures. <br>• Experience using ERP, CRM, ticketing, or service-management systems is preferred

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>MAIN DUTIES AND RESPONSIBILITIES:</b></p><p><b>Marketing Supervision:</b></p><p>Develop and implement marketing plans and campaigns in coordination with management.</p><p>Supervise marketing operations, including advertising, digital marketing, and promotional activities.</p><p>Monitor and analyze market trends, competitors activities, and customer feedback to identify opportunities for improvement.</p><p>Coordinate with the sales team to align marketing efforts with sales targets and business goals.</p><p>Prepare periodic marketing reports (campaign results, ROI analysis, social media growth, etc.).</p><p>Content Creation &amp; Branding</p><p>Create engaging and original content for social media, website, newsletters, and promotional materials.</p><p>Manage the company s digital presence across social media platforms (Facebook, Instagram, LinkedIn, YouTube, etc.).</p><p>Write, edit, and proofread marketing materials to ensure brand consistency and professionalism.</p><p>Develop visual and multimedia content in coordination with graphic designer</p><p>Plan and execute photo and video shoots for campaigns, events, and product promotions.</p><p>Digital Marketing</p><p>Manage online advertising campaigns (Google Ads, Meta Ads, etc.) to increase visibility and lead generation.</p><p>Track and analyze digital performance metrics to optimize engagement and conversion.</p><p>Coordinate email marketing campaigns and maintain subscriber databases.</p><p>Event &amp; Promotion Management</p><p>Assist in product launches, and exhibitions.</p><p>Coordinate with management for promotional activities and branding materials.</p><p>Ensure marketing materials and visuals are up to date in all stores and websites.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>REGULATORY REQUIREMENTS (Education and Experience) and SKILLS:</p><p>- Bachelor s degree in Marketing, Business Administration, or a related field.</p><p>- Creative thinker and a Data lover.</p><p>- +2 years of experience in marketing roles, preferably within the tech retail or consumer electronics sector.</p><p>- Strong knowledge of digital marketing tools and platforms, including SEO, SEM, email marketing, and social media advertising.</p><p>- Ability to lead and mentor a marketing team.</p><p>- Ability to develop strategic marketing plans that align with business objectives.</p><p>- Exceptional written and verbal communication skills.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>JOB DUTIES:</b></p><p>Develop and implement marketing plans and campaigns in coordination with management.</p><p>Supervise marketing operations, including advertising, digital marketing, and promotional activities.</p><p>Create engaging and original content for social media, website, newsletters, and promotional materials.</p><p>Manage the company s digital presence across social media platforms (Facebook, Instagram, LinkedIn, YouTube, etc.).</p><p>Write, edit, and proofread marketing materials to ensure brand consistency and professionalism.</p><p>Track and analyze digital performance metrics to optimize engagement and conversion.</p><p>Coordinate email marketing campaigns and maintain subscriber databases.</p><p>WORKING HOURS:</p><p>Monday to Friday from 8:00 till 5:00 pm</p><p>Saturday from 8:00am till 2:00 pm</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Marketing, Business Administration, or a related field.</li><li>Creative thinker and a Data lover.</li><li>2+years of experience in marketing roles, preferably within the tech retail or consumer electronics sector.</li><li>Strong knowledge of digital marketing tools and platforms, including SEO, SEM, email marketing, and social media advertising.</li><li>Ability to lead and mentor a marketing team.</li><li>Ability to develop strategic marketing plans that align with business objectives.</li><li>Exceptional written and verbal communication skills.</li></ul><p></p></section>

Job Description <br>We are looking for a motivated Structural Drafter to join our structural detailing team. The successful candidate will prepare reinforced concrete shop drawings for all structural elements while coordinating closely with structural engineers and technical managers to ensure accurate, high-quality deliverables. <br> <br>Responsibilities <br>-Prepare reinforced concrete shop drawings for all structural elements. <br>-Interpret structural design drawings and convert them into detailed shop drawings. <br>-Coordinate with structural engineers and technical managers to resolve technical issues. <br>-Revise drawings based on review comments and project requirements. <br>-Ensure all drawings comply with project specifications and company standards. <br>-Deliver assigned tasks within project deadlines while maintaining high quality. <br> <br>Requirements <br>-Bachelor's degree in Civil Engineering, Architecture, or a related field. <br>-0–2 years of experience in structural detailing. <br>Proficiency in AutoCAD. <br>Ability to read and interpret structural drawings. <br>-Strong attention to detail and accuracy. <br>-Good communication and teamwork skills. <br>-Eagerness to learn and develop in the field of structural detailing

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>The Opportunity:</b></p><p>Are you a talented Tekla BIM Modeler looking for a dynamic and innovative work environment where you can contribute to exciting structural engineering projects?</p><p>Are you passionate about creating accurate and efficient structural models through cutting-edge BIM technology?</p><p>Our Structural Engineering Department is looking for a passionate Tekla BIM Modeler to join our team.</p><p><br></p><p>Your Key Responsibilities:</p><p>• Develop, manage, and update detailed structural BIM models using Tekla Structures for a variety of commercial, residential, industrial, and infrastructure projects, ensuring accuracy and compliance with design specifications.</p><p>• Produce high-quality General Arrangement (GA), fabrication, assembly, and shop drawings directly from Tekla models.</p><p>• Generate accurate Bills of Materials (BOMs), material take-offs, and other project deliverables to support fabrication and construction processes.</p><p>• Collaborate closely with structural engineers and project teams to interpret structural calculations, incorporate design changes, and maintain model accuracy throughout all project phases.</p><p>• Identify and address any issues or conflicts within the Tekla BIM models, particularly those related to the integration of civil, structural, MEP, and electrical systems, and coordinate with team members to resolve discrepancies.</p><p>• Ensure all models and drawings comply with industry standards, company procedures, and project-specific requirements.</p><p>• Maintain project documentation derived from Tekla models, including drawings, reports, schedules, and revision records.</p><p>• Stay up-to-date with the latest Tekla features, BIM technologies, and industry best practices while contributing to the continuous improvement of internal modeling workflows.</p><p><br></p><p>Required Qualifications:</p><p>• Bachelor's degree in civil engineering, Structural Engineering, Architecture, Construction Management, or related field.</p><p>• Minimum 2 years of experience as a Tekla BIM Modeler or in a similar structural modeling role, with hands-on experience in civil, structural, electrical and MEP.</p><p>• Strong proficiency in Tekla Structures and a solid understanding of BIM standards and structural detailing practices including those related to MEP and electrical systems.</p><p>• Experience producing General Arrangement (GA), assembly, fabrication, and shop drawings from Tekla models.</p><p>• Experience in AutoCAD, Revit, Navisworks, and other BIM or drafting software.</p><p>• Strong attention to detail and accuracy in structural modeling and documentation.</p><p>• Excellent verbal and written communication skills, with the ability to effectively collaborate with team members and stakeholders.</p><p>• Proven ability to identify modeling issues, coordinate design revisions, and maintain high-quality project deliverables.</p><p><br></p><p>Desired Qualifications:</p><p>• Experience working on a wide range of structural projects, including commercial, residential, industrial, and infrastructure developments.</p><p>• Experience with additional BIM tools or software (such as Dynamo, BIM 360, or Civil 3D), with a focus on Civil, Structural, MEP and electrical modeling.</p><p>• Experience with Parametric design (Rhino 3D, Grasshopper), steel and reinforced concrete structural detailing.</p><p>• A proactive approach to learning new technologies and continuously improving BIM processes and modeling efficiency.</p><div><br></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><br></p></section>

The Opportunity: <br>Are you a talented Tekla BIM Modeler looking for a dynamic and innovative work environment where you can contribute to exciting structural engineering projects? <br>Are you passionate about creating accurate and efficient structural models through cutting-edge BIM technology? <br>Our Structural Engineering Department is looking for a passionate Tekla BIM Modeler to join our team. <br> <br>Your Key Responsibilities: <br>• Develop, manage, and update detailed structural BIM models using Tekla Structures for a variety of commercial, residential, industrial, and infrastructure projects, ensuring accuracy and compliance with design specifications. <br>• Produce high-quality General Arrangement (GA), fabrication, assembly, and shop drawings directly from Tekla models. <br>• Generate accurate Bills of Materials (BOMs), material take-offs, and other project deliverables to support fabrication and construction processes. <br>• Collaborate closely with structural engineers and project teams to interpret structural calculations, incorporate design changes, and maintain model accuracy throughout all project phases. <br>• Identify and address any issues or conflicts within the Tekla BIM models, particularly those related to the integration of civil, structural, MEP, and electrical systems, and coordinate with team members to resolve discrepancies. <br>• Ensure all models and drawings comply with industry standards, company procedures, and project-specific requirements. <br>• Maintain project documentation derived from Tekla models, including drawings, reports, schedules, and revision records. <br>• Stay up-to-date with the latest Tekla features, BIM technologies, and industry best practices while contributing to the continuous improvement of internal modeling workflows. <br> <br>Required Qualifications: <br>• Bachelor's degree in civil engineering, Structural Engineering, Architecture, Construction Management, or related field. <br>• Minimum 2 years of experience as a Tekla BIM Modeler or in a similar structural modeling role, with hands-on experience in civil, structural, electrical and MEP. <br>• Strong proficiency in Tekla Structures and a solid understanding of BIM standards and structural detailing practices including those related to MEP and electrical systems. <br>• Experience producing General Arrangement (GA), assembly, fabrication, and shop drawings from Tekla models. <br>• Experience in AutoCAD, Revit, Navisworks, and other BIM or drafting software. <br>• Strong attention to detail and accuracy in structural modeling and documentation. <br>• Excellent verbal and written communication skills, with the ability to effectively collaborate with team members and stakeholders. <br>• Proven ability to identify modeling issues, coordinate design revisions, and maintain high-quality project deliverables. <br> <br>Desired Qualifications: <br>• Experience working on a wide range of structural projects, including commercial, residential, industrial, and infrastructure developments. <br>• Experience with additional BIM tools or software (such as Dynamo, BIM 360, or Civil 3D), with a focus on Civil, Structural, MEP and electrical modeling. <br>• Experience with Parametric design (Rhino 3D, Grasshopper), steel and reinforced concrete structural detailing. <br>• A proactive approach to learning new technologies and continuously improving BIM processes and modeling efficiency. <br> <br>Perks and Benefits: <br>• Competitive compensation package: Receive a competitive base salary commensurate with your experience, skills and performance. <br>• Opportunities for professional growth: Access to training programs, workshops, conferences and industry events to stay updated on the latest advancements. <br>• Cutting-Edge technologies and innovative projects: Work with the latest engineering tools and industry-leading software while collaborating with cross-functional teams on projects that address real-world challenges. <br>• Work-Life balance: Flexible work schedules to accommodate your personal needs and promote a healthy work-life balance. <br> <br>Additional Information: <br>If you're excited about the opportunity, please send your resume to hr(at)eqsols(dot)com <br>Note that this position will be physically located in Tripoli, Lebanon and fully remote applicants will NOT be considered